
The AirTAC GAC F.R.L. Unit GAC400C10ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated air at a precisely controlled lower pressure, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported body hosts a 5 um element for fine particle capture, and the metal bowl equips it for rugged industrial settings. Air flows through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.
Designed for low-pressure duties, it operates within the 0.15-0.4 MPa (20-58 psi) range. The automatic drain clears condensate from the 100 cc bowl without operator intervention, while the fitted circular gauge reads in MPa and psi for the default NPT thread. Weighing 2390 g, this assembly requires a solid panel or frame mount rather than tubing support. Order code GAC400C10ALWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C10ALWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument-quality air to sensitive solenoid valve banks that require 5 um filtration and stable low-pressure regulation.
Protects delicate film-handling actuators by holding a safe 0.15-0.4 MPa output while automatically draining condensate.
Conditions supply air for benchtop test rigs where the metal bowl withstands occasional chemical exposure and manual draining is impractical.
Select this model when a machine circuit strictly requires low-pressure actuation, as the L type caps at 0.4 MPa. If the application might ever demand more, the standard S type is the correct choice. The 5 um W element catches far finer particles than the 40 um default, making it ideal for precision valves, though it requires more frequent replacement. Because the lubricator introduces oil mist downstream, choose a separate filter-regulator if the line must remain oil-free. Should a component fail, the assembly breaks down into GAF400-10, GAR400-10 and GAL400-10 spares. Stepping down to the GAC300 reduces the plotted flow envelope from 6000 to 3000 L/min at 0.7 MPa inlet, while the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 5 um element, a metal bowl, an automatic drain, and a temperature range of -5 to 70 C. The drain bowl holds 100 cc and the oil bowl 185 cc. It weighs 2390 g and uses ISO VG 32 lubricant.
The L type designation restricts regulation to 0.15-0.4 MPa (20-58 psi), making it suitable for sensitive pneumatics that cannot withstand higher forces. If your equipment ever requires standard pressure, this model will be insufficient. A circular gauge reading in MPa and psi is fitted to monitor this narrow band precisely.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.