
The AirTAC GAC F.R.L. Unit GAC400C10ASTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatic setups, this GAC400C10ASTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in port pairs with a 2390 g body mass, placing it firmly in a mid-to-heavy size class that requires a solid panel or frame mount rather than tubing support. Air passes through the filter first, then the regulator, with oil mist added last so the internal regulator seat never fouls.
This specific configuration uses a durable metal bowl and an automatic drain to clear condensate without an operator, making it well suited to unattended or wet lines. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. A reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page.
| Model | Airtac GAC F.R.L. Unit GAC400C10ASTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds multiple pneumatic wrenches and actuators on a vehicle production line, where the automatic drain handles heavy condensate loads during continuous shift work.
Provides stable pressure and oil mist to the cylinders driving a packaging conveyor, ensuring consistent carton folding and sealing under high cycle rates.
Conditions air for pneumatic tool release mechanisms on machining centers, protecting precision valves from particulate ingress with its 40 um element.
Stepping up from the GAC300 increases the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, giving this 3/8in body far greater capacity for multi-actuator circuits. The 100 cc condensate bowl and 185 cc oil bowl drive the service interval, demanding far fewer interventions than smaller bodies. The 40 um element handles general plant air, while the automatic drain ensures condensate is ejected continuously. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Spares are ordered separately as GAF400-10, GAR400-10 and GAL400-10.
Because the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting; a regulator needs inlet pressure above its setpoint, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out, or set lower.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, a 40 um element, and weighs 2390 g. The recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is attached to this assembly. The catalogue illustrates this as a distinct pneumatic symbol, and you should confirm specific functional details from the datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.