
The AirTAC GAC F.R.L. Unit GAC400C10LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic machinery, this GAC400C10LT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 2390 g body mass, requiring a firm panel or frame mount rather than tubing support. Air passes through the 40 um element first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.
Configured for low-pressure duties, the regulator operates within a 0.15-0.4 MPa (20-58 psi) range. A circular gauge is fitted to read the set pressure in MPa/psi, matching the default NPT thread. The metal bowl equips this unit for harsher industrial settings, and the assembly carries a 100 cc condensate bowl alongside a 185 cc oil reservoir to dictate maintenance intervals.
| Model | Airtac GAC F.R.L. Unit GAC400C10LT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precisely regulated, low-pressure air to small pneumatic presses holding delicate electronic components during circuit board assembly.
Supplies a steady 0.4 MPa supply to packaging line sealing jaws that require gentle, oil-misted actuation to prevent gripping damage.
Conditions air for fluid dispensing robots where a strict low-pressure ceiling prevents splashing or accidental over-injection of reagents.
Choose this 3/8in port model when an application demands a strict 0.15-0.4 MPa (20-58 psi) ceiling; if the machine may ever require higher pressure, the standard type is the correct choice instead. The metal bowl offers a robust alternative to PC or nylon for demanding environments, while the semi-auto and manual drain pair provides flexible condensate management. Because the lubricator introduces oil mist downstream, select a separate filter-regulator if the line must remain oil-free. Should the element clog or a bowl sustain damage, order the individual GAF400-10, GAR400-10 and GAL400-10 spares rather than replacing the whole unit. Stepping down from this body, the GAC300 offers a 3000 L/min plotted flow envelope at 0.7 MPa inlet, whereas this GAC400 reaches 6000 L/min, doubling the sizing capacity. Note that the 0.4 MPa upper limit is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 40 um element, a metal bowl, and a semi-auto plus manual drain. The unit weighs 2390 g, holds 100 cc of condensate and 185 cc of oil, functions between -5 to 70 C, and uses ISO VG 32 lubricant.
The metal bowl provides a rugged housing solution for industrial environments where chemical exposure or impact risks might compromise standard polycarbonate. The lower pressure range restricts the outlet to 0.15-0.4 MPa (20-58 psi), making it suitable for sensitive actuators, and a circular gauge reading in MPa/psi is fitted to monitor this narrow band precisely.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.