
The AirTAC GAC F.R.L. Unit GAC400C10SNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC GAC400C10SNT F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 40 um element and a standard pressure range of 0.15-0.9 MPa (20-130 psi). Because the metal bowl is fitted, the unit suits harsher plant environments where polycarbonate might be at risk.
Air passes through the filter first, then the regulator, before oil mist is added downstream by the lubricator, ensuring the regulator seat never gets fouled by oil. This specific code ships without a gauge, though a 1/4in gauge connection is ready if you need to add one later to read the set pressure. The assembly weighs 2390 g, meaning it requires proper panel or frame mounting rather than relying on the connected tubing for support. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C10SNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds pneumatic torque wrenches and actuators on a vehicle production line, where the metal bowl withstands occasional chemical splashes and the 3/8in port handles high air demand.
Conditions air for the large bore cylinders that fold and seal cardboard cartons, ensuring consistent force through the 0.15-0.9 MPa standard pressure range.
Supplies clean, lubricated air to high-speed pneumatic diverters on parcel conveyors, protecting internal valve seals from wear with a steady oil mist.
Choose this 3/8in ported unit for duties requiring a robust metal bowl and a 40 um standard element. The semi-auto and manual drain pair is fitted, dumping condensate on pressure drops or on demand, while the missing gauge (N) means operators cannot read the set pressure without adding one to the 1/4in connection. If your machine requires completely oil-free air downstream, you must omit the lubricator and choose a separate filter-regulator instead. For maintenance, the three units are separately orderable as GAF400-10, GAR400-10 and GAL400-10, so a damaged bowl does not mean replacing the whole assembly. Stepping up from a GAC300 increases the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, giving exactly a 2x flow-envelope ratio for sizing larger duties.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 40 um element, a 100 cc drain bowl, a 185 cc oil bowl, and weighs 2390 g. The operating temperature is -5 to 70 C, and it uses ISO VG 32 lubricant.
No, the N in the code means no gauge is supplied. To read the set pressure, you must install a circular gauge into the 1/4in gauge connection provided on the body. The default NPT thread scale for this body would read in MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.