
The AirTAC GAC F.R.L. Unit GAC400C10ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GAC400C10ST is a three-unit F.R.L. combination - filter, regulator and lubricator - pre-assembled on a single L-shape bracket with quick mounting clamps. Air passes through the filter first, then the regulator, and finally the lubricator, which adds oil mist downstream so the regulator seat stays clean. With a 3/8in port and a 2390 g mass, this unit suits medium-duty machine circuits where a compact body would be undersized but a full 1/2in line is not yet needed.
The metal bowl on this model holds 100 cc of condensate and the oil bowl 185 cc, giving a generous service interval for a production line. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Rated for -5 to 70 C, it must not freeze, so keep it out of unheated winter lines.
| Model | Airtac GAC F.R.L. Unit GAC400C10ST |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a CNC lathe's pneumatic clamping system with filtered, regulated and lubricated air, keeping the chuck actuator cycling smoothly.
Conditions air for a multi-spindle screwdriving station, where consistent pressure and oil mist protect the tool motors.
Supplies a carton-forming machine's cylinders and valves, with the metal bowl standing up to a dusty plant environment.
Choose the GAC400C10ST when your line needs the 3/8in port size and the metal bowl's durability for shop-floor conditions. The semi-auto drain dumps condensate on each pressure drop, with a manual backup for on-demand draining - a good fit for attended stations. The standard type regulates to 0.9 MPa, and the 40 um element handles general workshop air; step to a 5 um element if you feed precision valves. Spares are GAF400-10, GAR400-10 and GAL400-10, all sharing the same body-port suffix.
The GAC400's 100 cc drain bowl holds about 4x the condensate of the GAC200's 25 cc bowl, so this body needs far less frequent attention on a busy line.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 100 cc and the oil bowl 185 cc. Recommended lubricant is ISO VG 32, and the unit weighs 2390 g.
The metal bowl is a build choice for tougher environments where a transparent bowl might be at risk. It holds the same 100 cc of condensate as the PC or nylon versions, and the common specification - 1.0 MPa max pressure and -5 to 70 C - applies. Confirm compatibility with any aggressive chemicals or solvents before installation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.