
The AirTAC GAC F.R.L. Unit GAC400C10STK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, this GAC400C10STK assembly integrates a filter, regulator and lubricator on a single L-shape bracket using quick mounting clamps. The 3/8in port pairs with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and a 40 um element. A circular gauge reading MPa/psi is fitted for the default NPT thread, while a reverse-flow (reflux) valve is included and shown as a separate pneumatic symbol in the catalogue.
Air passes through the filter first, then the regulator, with oil mist added last so the regulator seat stays clean. The metal bowl equips this unit for rugged plant environments, and the 100 cc condensate bowl paired with a 185 cc oil reservoir sets the maintenance interval. Weighing 2390 g, this body size requires a solid panel or frame mount rather than tubing support.
| Model | Airtac GAC F.R.L. Unit GAC400C10STK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds main air headers for robotic welding cells and stamping presses where a 3/8in port handles high actuator demand.
Provides consistent pressure and oil mist to the pneumatic cylinders folding and sealing corrugated cardboard boxes.
Conditions air for automatic tool change systems, protecting precision valves from particulate with its 40 um element.
Choose this metal-bowl unit for demanding factory settings where a PC bowl might risk impact damage. It carries both a semi-auto drain (which dumps condensate on every pressure drop) and a manual drain for on-demand emptying. If your downstream line must stay completely oil-free, you should select a filter-regulator instead, because this lubricator introduces oil mist into the air stream. Should the element clog or a bowl get damaged, the three units are separately orderable as GAF400-10, GAR400-10 and GAL400-10.
The catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, exactly double the 3000 L/min envelope of the smaller GAC300. Because the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, features a 100 cc drain bowl and a 185 cc oil bowl, uses ISO VG 32 lubricant, and weighs 2390 g.
The K signifies that a reverse-flow (reflux) valve is fitted to this assembly. The catalogue lists this component as a separate pneumatic symbol on its own page, and specific functional details should be confirmed from that datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.