
The AirTAC GAC F.R.L. Unit GAC400C10SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, this AirTAC GAC400C10SWT integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 5 um element to trap fine particles before they reach precision valves. A metal bowl equips the unit, and the standard type regulates pressure across a 0.15-0.9 MPa (20-130 psi) range.
Air passes through the filter first, then the regulator, with oil mist added last so the internal seat never fouls. A circular gauge is fitted, reading MPa/psi for the default NPT thread. Weighing 2390 g, the assembly carries a 100 cc condensate bowl and a 185 cc oil reservoir, requiring a firm panel or frame mount rather than tubing support.
| Model | Airtac GAC F.R.L. Unit GAC400C10SWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oil-misted air to tool changer cylinders on machining centers where 5 um filtration protects tight clearances.
Conditions supply for continuous motion packaging actuators, ensuring steady 0.15-0.9 MPa pressure for sealing jaws.
Prepares air for multi-actuator robotic cells, using the 100 cc drain bowl to handle moisture from intermittent high draw.
Choose this configuration when a machine demands highly filtered air at moderate flow, as the 5 um element catches far finer particulates than the 40 um standard, though it requires more frequent replacement. The metal bowl offers robust physical durability compared to PC or nylon alternatives. The semi-auto and manual drain pair fitted here dumps condensate on every pressure drop or on operator demand. If the downstream line must remain oil-free, omit the lubricator and select a filter-regulator instead. Replacement spares follow the 400-10 suffix: GAF400-10, GAR400-10 and GAL400-10. Stepping up to the GAC500 roughly doubles the flow envelope to 7000 L/min at 0.7 MPa inlet, whereas this GAC400 plots to 6000 L/min. The 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, but this is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, a 5 um element, and weighs 2390 g. The recommended lubricant is ISO VG 32.
The 5 um element traps significantly finer particles than the 40 um standard, making it ideal for protecting precision valves and instrument air circuits. The metal bowl provides a rugged housing solution, sharing the same 1.0 MPa pressure rating and -5 to 70 C temperature limits as the PC and nylon options.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.