verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC400N10LTK

The AirTAC GAC F.R.L. Unit GAC400N10LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialNylon
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight2390 g
$139.76 $147.26Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-10 bowl, type and element option on one page All GAC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC400N10LTK

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported body pairs a 100 cc condensate bowl with a 185 cc oil reservoir, weighing 2390 g. A 40 um element captures particulates, while the lower pressure type governs output between 0.15-0.4 MPa (20-58 psi).

Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The nylon bowl is fitted with both semi-auto and manual drains, and a circular gauge reading MPa/psi is included for the default NPT thread. This specific configuration also carries a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC400N10LTK has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC400N10LTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC400N10LTK
SeriesGAC400 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC400N10LTK

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 3/8" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC400N10LTK Is Used

precision_manufacturing

Low-Force Clamping

Feeds delicate pneumatic clamps on electronics assembly lines where actuator force must stay below 0.4 MPa to avoid crushing components.

package_2

Light-Duty Sealing

Conditions air for small bagging and sealing machines, providing steady low pressure and oil mist to protect moving jaws.

science

Lab Pneumatic Stations

Supplies clean, regulated air to laboratory test fixtures that require precise low-pressure control and lubrication for valves.

Is the Airtac GAC F.R.L. Unit GAC400N10LTK the Right Air-Prep Unit?

Choose this assembly when a machine requires strictly limited downstream pressure, as the L type tops out at 0.4 MPa; if the equipment might ever demand more, the standard 0.15-0.9 MPa variant is the correct choice. The 100 cc drain bowl and 185 cc oil capacity dictate the maintenance interval, requiring fewer interventions than a smaller body. Because oil mist is introduced downstream, select a filter-regulator instead if the line must remain oil-free. Should the element clog or bowl sustain damage, order the individual GAF400-10, GAR400-10 and GAL400-10 spares rather than replacing the whole assembly. Stepping down to the GAC300 reduces the plotted flow envelope from 6000 L/min to 3000 L/min at 0.7 MPa inlet, halving the available capacity. Furthermore, the 0.4 MPa ceiling is about 44% of the standard type's 0.9 MPa maximum, quantifying exactly what is sacrificed for low-pressure control.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC400N10LTK FAQ

This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 40 um element, a 100 cc drain bowl, a 185 cc oil bowl, and weighs 2390 g. The unit functions from -5 to 70 C and uses ISO VG 32 lubricant.

The K indicates that a reverse-flow (reflux) valve is attached to the unit. The catalogue illustrates this as a distinct pneumatic symbol, and its specific operational details are found on a separate page of the documentation.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC400N10LTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC400N10LTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.