verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC400N10LWT

The AirTAC GAC F.R.L. Unit GAC400N10LWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight2390 g
$128.87 $136.37Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-10 bowl, type and element option on one page All GAC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC400N10LWT

Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported body houses a 5 um element for trapping fine particles, while the lower pressure type governs output strictly between 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted, reading MPa/psi for the default NPT thread.

Air passes through the filter first, then the regulator, ensuring oil mist from the lubricator is added last so it never fouls the regulator seat. The nylon bowl equips this assembly with a 100 cc condensate capacity and a 185 cc oil reservoir, requiring panel mounting to support its 2390 g mass. Condensate is expelled via a semi-auto and manual drain combination. Order code GAC400N10LWT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC400N10LWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC400N10LWT
SeriesGAC400 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC400N10LWT

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 3/8" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC400N10LWT Is Used

precision_manufacturing

Precision Valve Arrays

Feeds instrument-quality air to sensitive solenoid valve banks using the 5 um element to prevent spool sticking.

science

Laboratory Pneumatics

Regulates low-pressure air for delicate test fixtures that require stable 0.15-0.4 MPa outputs without risking over-pressurization.

package_2

Light Packaging Lines

Conditions air for small pick-and-place actuators, adding the exact oil mist needed to prolong cylinder seals.

Is the Airtac GAC F.R.L. Unit GAC400N10LWT the Right Air-Prep Unit?

Choose this configuration when a 3/8in line requires precision filtration and low outlet pressures. The 5 um element catches far finer particulates than the standard 40 um grade, making it ideal for sensitive valves, though it will require more frequent element replacement. If the machinery might ever demand more than 0.4 MPa, the L type is the wrong choice, as it caps out well below the standard 0.9 MPa ceiling. Because oil mist is injected downstream, select a filter-regulator instead if the application requires strictly oil-free air downstream. Replacement parts share the same body-port suffix: order GAF400-10, GAR400-10 and GAL400-10 individually. Stepping down to the GAC300 halves the plotted flow envelope to 3000 L/min at 0.7 MPa inlet, whereas this 400 body reaches 6000 L/min. The 0.4 MPa upper limit of this lower-pressure type is just 44% of the standard 0.9 MPa ceiling.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC400N10LWT FAQ

This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi). It shares a 1.0 MPa (145 psi) maximum pressure and a 1.5 MPa (215 psi) proof pressure across the series. Operating temperature is -5 to 70 C, using ISO VG 32 lubricant. The unit weighs 2390 g, features a 100 cc drain bowl and a 185 cc oil bowl.

The nylon bowl provides a durable, shatter-resistant alternative to standard PC without changing the 1.0 MPa pressure rating. The fitted semi-auto drain expels condensate automatically whenever the system pressure drops, but also includes a manual override for on-demand emptying between cycles.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC400N10LWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC400N10LWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.