
The AirTAC GAFC Air Service Unit GAFC200C08AL is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08AL is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a shared T-bracket with quick clamps. It handles a 1/4in port and a lower pressure band of 0.15-0.4 MPa (20-58 psi), with a 40 um element trapping solids and water. The metal bowl is specified by the C code, and the automatic drain clears condensate without an operator.
Air is cleaned and set to pressure in the first body, then the lubricator adds a metered oil mist downstream, so oil never travels back through the regulator seat. The 25 cc drain bowl and 36 cc oil bowl set the service rhythm for this 590 g unit. A circular gauge is fitted, reading MPa and psi on the PT thread scale.
| Model | Airtac GAFC Air Service Unit GAFC200C08AL |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic clamp on a benchtop assembly jig with regulated 0.4 MPa air, keeping force consistent for delicate part holding.
Supply a small laboratory test rig that requires a stable, lower pressure air source for actuating a miniature cylinder or valve.
Run a compact paint spray gun setup where the lower pressure range prevents overspray and the lubricator maintains tool performance.
Choose the GAFC200C08AL when your line needs a compact 1/4in F.R.L. set with a lower pressure ceiling of 0.4 MPa, not the standard 0.9 MPa. The metal bowl is a build choice; the catalogue gives no material-specific ratings, so confirm it suits your environment. The automatic drain suits wet or unattended lines, and the 40 um element is the default grade. If you need finer filtration, the W option swaps in a 5 um element, and the K option adds a reverse-flow valve. Spares are orderable as the GAFR200-08 filter & regulator and the GAL200-08 lubricator. For oil-free air downstream, omit the lubricator and choose a plain GAFR instead. Max supply of 1.0 MPa leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It works in -5 to 70 C temperatures, has a 25 cc drain bowl and a 36 cc oil bowl, and weighs 590 g. Use ISO VG 32 lubricant.
The C code specifies a metal bowl, a material choice you should confirm for your environment. The A code means an automatic drain, which clears condensate without an operator, making it suitable for unattended or wet lines. The gauge is fitted and reads MPa/psi.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.