
The AirTAC GAFC Air Service Unit GAFC200C08LK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08LK is a two-piece F.R.L. combination: the filter and regulator share one body, and a lubricator is joined to it on a T-bracket with quick clamps. It is built for a 1/4in port and operates in the lower-pressure band of 0.15-0.4 MPa (20-58 psi), with a 40 um element filtering the air before pressure is set. The metal bowl is specified by the C code, and the semi-auto and manual drains are both fitted for condensate removal.
The two-piece layout means there is one less inter-unit joint to seal compared with a three-body filter, regulator and lubricator train. Air is cleaned and regulated in the first body, then the lubricator adds a metered oil mist last, so oil never travels back through the regulator seat. At 590 g, this size class suits a compact machine or a single actuator station, and the 25 cc drain bowl with 36 cc oil bowl sets the service rhythm for the unit.
| Model | Airtac GAFC Air Service Unit GAFC200C08LK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Set a precise 0.3 MPa for a small indexing table or a light press, where the lower-pressure range gives finer adjustment authority than a standard 0.9 MPa regulator.
Fit this 590 g unit on a small assembly station or a benchtop fixture where a 1/4in port matches the air prep needs of a single pneumatic cylinder.
Use it to supply clean, regulated, lubricated air to a small test rig or a laboratory actuator that runs below 0.4 MPa and needs a consistent oil mist.
Choose the GAFC200C08LK when your circuit needs a 1/4in port and a regulated ceiling of 0.4 MPa. The L type tops out at 0.4 MPa, so if the machine may ever require more than that, step to the standard S type instead. The metal bowl is a build choice, but the catalogue gives no impact or chemical data for it, so confirm it suits your surroundings. The circular gauge is fitted and reads in MPa and psi for the PT thread. The reverse-flow (reflux) valve is fitted, and the catalogue draws it as a separate pneumatic symbol. Spare parts are orderable as the GAFR200-08 filter & regulator and the GAL200-08 lubricator, both matching this body and port. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the regulated band, so plan the inlet pressure accordingly.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200C08LK is a lower-pressure F.R.L. combination with a working range of 0.15-0.4 MPa (20-58 psi). Maximum pressure is 1.0 MPa (145 psi) and proof pressure is 1.5 MPa (215 psi). It operates from -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Recommended lubricant is ISO VG 32. The unit weighs 590 g and has a 1/4in port.
The C code specifies a metal bowl, which is a build choice for the unit. The catalogue does not provide impact or chemical resistance data for the material, so confirm it fits your environment. The K code means a reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol. The semi-auto and manual drains are both fitted on this model.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.