
The AirTAC GAFC Air Service Unit GAFC200C08LW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200C08LW is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a T bracket with quick clamps. The 1/4in port and 590 g mass place it in the compact size class, suited for single actuators or small jigs where space is tight.
The lower-pressure type regulates from 0.15 to 0.4 MPa (20-58 psi), with a 5 um element trapping fine particles. The metal bowl holds 25 cc of condensate, while the oil bowl holds 36 cc. A circular gauge with MPa/psi scale is fitted, and the semi-auto plus manual drain gives both automatic dumping on pressure drop and on-demand operation.
| Model | Airtac GAFC Air Service Unit GAFC200C08LW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a 5 um filtered, regulated air supply to a precision pneumatic valve on a small assembly fixture, where consistent low pressure is critical.
Use on a lab bench test rig that requires adjustable air pressure up to 0.4 MPa for calibrating pressure switches or gauges.
Supply a small paint spray gun with clean, regulated air at low pressure, where the lubricator adds a fine oil mist to the air stream.
Choose the GAFC200C08LW when your circuit needs fine filtration and regulated air below 0.4 MPa. The 5 um element suits precision valves or instrument air, though it will need more frequent service than a 40 um element. The metal bowl is specified by the C code; confirm it suits your environment, as the catalogue gives no material-specific ratings. The semi-auto drain clears condensate when pressure drops, while the manual drain allows immediate purging. The PT thread carries an MPa/psi gauge scale, matching the fitted circular gauge. For oil-free lines, omit the lubricator and select a plain GAFR200-08 filter-regulator instead. Spare parts are the GAFR200-08 and GAL200-08, both orderable separately. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200C08LW operates from 0.15 to 0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the unit weighs 590 g. Recommended lubricant is ISO VG 32.
The C code specifies a metal bowl. The catalogue lists metal as one of three bowl options (PC, metal, nylon) without giving material-specific ratings, so the choice is a build preference. Confirm the metal bowl suits your operating environment, as the temperature and pressure ratings are the same across all materials.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.