
The AirTAC GAFC Air Service Unit GAFC200C08SNK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAFC200C08SNK is an F.R.L. combination where the filter and regulator share one body, paired with a lubricator on a T-bracket. The 1/4in port and 590 g mass place it in the compact size class, suitable for feeding a single actuator or small jig.
Air enters the first body where solids and moisture are removed and pressure is set to 0.15-0.9 MPa (20-130 psi). The lubricator then adds a metered oil mist downstream, so oil never passes back through the regulator seat. A 40 um element handles standard shop air, and the metal bowl is specified by the C code.
| Model | Airtac GAFC Air Service Unit GAFC200C08SNK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic cylinder on a small assembly fixture with filtered, regulated, and lubricated air from a compact 1/4in unit.
Supply a manual press or clamping jig on a workbench, where the 590 g weight and small footprint fit tight spaces.
Protect a single valve or small tool on a short-run station, with the metal bowl for a shop-floor environment.
The GAFC200 body offers 1/8in and 1/4in ports; this 1/4in version suits short runs to a single device. The metal bowl is a build choice, and the shared specification of 1.0 MPa max and -5 to 70 C does not change with material, so confirm it fits your surroundings. The semi-auto drain dumps condensate on each pressure drop, with a manual drain for on-demand use, and the reverse-flow (reflux) valve is fitted. No gauge is supplied, so the 1/8in gauge connection must be used if you add one. Spares are orderable as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, there is about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan for near-max inlet pressure if you need the full output.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses ISO VG 32 lubricant, has a 25 cc drain bowl and 36 cc oil bowl, and weighs 590 g.
The C code specifies a metal bowl, a build choice you should confirm suits your environment. The N after the port means no gauge is supplied, so you cannot read set pressure without adding one to the 1/8in gauge connection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.