
The AirTAC GAFC Air Service Unit GAFC200C08SNW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This AirTAC GAFC200C08SNW is a two-piece F.R.L. combination on a T-bracket: a filter-regulator body handles both filtration and pressure setting, then a separate lubricator adds a controlled oil mist to the air stream. The 1/4in port and 590 g mass suit it for compact machine sections where a full-size train would be overkill, and the metal bowl is specified for this build.
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a 5 um element that traps finer particles than the standard 40 um grade. No gauge is fitted, so the 1/8in gauge connection is available if you need to read the set pressure. The 25 cc condensate bowl and 36 cc oil bowl are separate, and the semi-auto drain dumps automatically on pressure drop while the manual drain gives on-demand control.
| Model | Airtac GAFC Air Service Unit GAFC200C08SNW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic clamp on a CNC fixture with clean, regulated, lubricated air at up to 0.9 MPa. The 5 um element protects the clamp's fine seals from abrasive particles.
Power a hand-held screwdriver or small press at a bench assembly station. The 1/4in port matches common tooling lines, and the metal bowl suits a workshop where knocks happen.
Run a compact indexing cylinder on a light assembly line. The 590 g unit mounts on a panel or frame, and the 25 cc condensate bowl handles a typical shift's moisture in a dry-air plant.
Choose the GAFC200 body for 1/8in or 1/4in port duties; this 08 version is the larger 1/4in option. The metal bowl is a build choice - the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm it suits your environment. The 5 um element filters finer than the 40 um standard, but will need more frequent service. The semi-auto plus manual drain pair is fitted here, while the A code specifies an automatic drain. The N after the port means no gauge is supplied; the 1/8in connection is there if you add one later. The PT thread carries an MPa/psi gauge scale. Spare parts are the GAFR200-08 filter-regulator and GAL200-08 lubricator, both orderable separately. The catalogue flow curve for this body is plotted to 1750 L/min at 0.7 MPa inlet, useful for relative sizing against the GAFC300's 3500 L/min envelope. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan inlet pressure carefully if you need the full output.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This F.R.L. combination operates on air at 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C and it must not freeze. The drain bowl holds 25 cc and the oil bowl 36 cc. Recommended lubricant is ISO VG 32. The complete unit weighs 590 g.
The C in the code specifies a metal bowl, chosen here as a build option - the catalogue gives no temperature or impact data for it, so confirm it fits your environment. The N after the port code means no gauge is supplied; the 1/8in gauge connection is present if you need to add one. The 5 um element provides finer filtration than the standard 40 um grade.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.