
The AirTAC GAFC Air Service Unit GAFC200C08SW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This AirTAC GAFC200C08SW is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator, mounted on a shared T-bracket with quick clamps. The 1/4in port and 590 g mass place it in the compact GAFC200 class, sized for a single actuator or small jig rather than a machine-wide header.
Air enters the first body where a 5 um element traps fine particles and the regulator sets pressure to 0.15-0.9 MPa (20-130 psi), then the lubricator meters ISO VG 32 oil mist into the flow last. The metal bowl holds 25 cc of condensate and the oil bowl 36 cc, so service intervals are short on this small body. A circular gauge is fitted, reading in MPa and psi for the PT thread.
| Model | Airtac GAFC Air Service Unit GAFC200C08SW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic valve on a small assembly fixture with the 5 um element filtering fine particles before the regulator sets a stable 0.15-0.9 MPa (20-130 psi) supply.
Run a manual screwdriver or small grinding tool on a workbench, where the lubricator adds ISO VG 32 oil mist to the air to keep the tool spindle running smoothly.
Protect a sensitive lab instrument that needs clean, regulated air at a fixed pressure, with the 5 um element and the compact 1/4in port fitting into a tight cabinet.
The GAFC200 body with a 1/4in port suits low-flow circuits; step up to the GAFC300 (3/8in port, 60 cc drain bowl) when a line feeds multiple actuators. The C code specifies a metal bowl, a build choice whose 1.0 MPa max and -5 to 70 C rating match all bowl materials, so confirm it suits your surroundings. The 5 um element traps finer particles than the standard 40 um for precision valves, at the cost of more frequent element service. Both a semi-auto drain (dumps on pressure drop) and a manual drain are fitted, so condensate can be cleared either way. The PT thread carries a circular gauge scaled in MPa and psi. Spares are orderable as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, there is only about 0.1 MPa of headroom above the 0.9 MPa top of the regulated range, so plan the supply pressure accordingly.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This F.R.L. combination operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It is rated for -5 to 70 C and uses ISO VG 32 lubricant. The drain bowl holds 25 cc, the oil bowl 36 cc, and the unit weighs 590 g.
The C in the code specifies a metal bowl for the filter section. This is a build choice; the catalogue gives no temperature, impact, or chemical resistance data for the material, so confirm it suits your environment. The 1.0 MPa max and -5 to 70 C rating are the same across PC, metal, and nylon bowls.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.