
The AirTAC GAFC Air Service Unit GAFC200N08AL is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This GAFC200N08AL is a compact F.R.L. combination where the filter and regulator share one body, and a lubricator is mounted on the same T-bracket. It handles a 1/4in port and delivers air in the lower pressure band of 0.15-0.4 MPa (20-58 psi), with a 40 um element trapping particulates before regulation.
The nylon bowl holds 25 cc of condensate and the oil bowl 36 cc, with the automatic drain clearing water without operator action. At 590 g it suits small jigs or a single actuator, and the catalogue flow curve is plotted to 1750 L/min at 0.7 MPa inlet for relative sizing.
| Model | Airtac GAFC Air Service Unit GAFC200N08AL |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a single pneumatic clamp on a benchtop assembly fixture, where the lower pressure range protects delicate parts from over-force.
Supply oil-misted air to a small hand-held pneumatic screwdriver in a repair shop, keeping the tool running smoothly.
Condition air for a laboratory test rig that requires regulated pressure below 0.4 MPa and filtered supply.
Choose this GAFC200N08AL when your circuit runs below 0.4 MPa and you need the convenience of an automatic drain. The nylon bowl is specified by the N before the port code, and the circular gauge reads in MPa/psi for the default PT thread. If a line must stay oil-free, select a plain GAFR200-08 filter-regulator instead of this lubricating set.
The two service units are orderable separately as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, there is about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200N08AL operates from 0.15 to 0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works in -5 to 70 C temperatures, has a 25 cc drain bowl and 36 cc oil bowl, and weighs 590 g. Use ISO VG 32 oil in the lubricator.
The A code specifies an automatic drain that expels condensate from the 25 cc bowl without manual intervention. This is useful for installations where the unit is mounted out of reach or the air supply is left on for long periods.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.