
The AirTAC GAFC Air Service Unit GAFC200N08ALK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
The GAFC200N08ALK is a compact F.R.L. combination built for 1/4in air lines, pairing a filter-regulator body with a lubricator on a single T-bracket. It delivers air filtered to 40 um, regulated to a lower 0.15-0.4 MPa (20-58 psi) band, and then oil-misted for downstream components. The nylon bowl and automatic drain suit this 590 g unit for light-duty stations where condensate must clear itself.
The lower-pressure tuning caps the regulated output at 0.4 MPa, so this is the right choice only for circuits that never need more than that ceiling. A circular gauge is fitted with an MPa/psi scale for the PT thread, and the reverse-flow valve is included as specified. With 25 cc condensate and 36 cc oil bowls, service intervals are short but predictable on a small machine.
| Model | Airtac GAFC Air Service Unit GAFC200N08ALK |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small bench-top clamping jig with regulated 0.15-0.4 MPa air, where the lower pressure protects delicate parts from over-force.
Use on a single-nozzle blow-off bench to clean machined parts with oil-misted air, keeping the downstream tool lubricated.
Supply one small pneumatic cylinder on a packaging or assembly station, with the automatic drain handling condensate in unattended runs.
Choose the GAFC200N08ALK for a 1/4in line that needs a soft 0.15-0.4 MPa (20-58 psi) output, such as a light clamping or blow-off station. The nylon bowl is a material choice only - the catalogue gives no toughness or chemical data, so confirm it suits your environment. The automatic drain clears water without an operator, and the 40 um element handles general shop air; step to the 5 um element if you fit precision valves. The PT thread carries an MPa/psi gauge scale, and the K code adds the reverse-flow valve. Spares are orderable as GAFR200-08 and GAL200-08. With the max supply at 1.0 MPa, you have about 0.6 MPa of headroom above the 0.4 MPa regulated top, so plan your inlet pressure accordingly.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
This F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works from -5 to 70 C, uses ISO VG 32 oil, has a 25 cc drain bowl and 36 cc oil bowl, and weighs 590 g.
The L type code sets the regulated band to 0.15-0.4 MPa instead of the standard 0.15-0.9 MPa. This is for circuits that need a gentle, consistent low pressure - if your machine may ever require more than 0.4 MPa, this is the wrong part and you should choose the S type instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.