verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFC200 · F.R.L. Combination (Filter-Regulator + Lubricator)

Airtac GAFC Air Service Unit GAFC200N08AS

The AirTAC GAFC Air Service Unit GAFC200N08AS is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade40 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeCircular, MPa / psi
  • Weight590 g
$71.09 $79.58Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFC200-08 bowl, type and element option on one page All GAFC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFC Air Service Unit GAFC200N08AS

The GAFC200N08AS is a two-piece F.R.L. combination where the filter and regulator share one body, and a lubricator is added downstream on a T-bracket. This 1/4in port unit weighs 590 g, so it suits small jigs and single actuators rather than machine headers. The nylon bowl is specified by the N code, and the automatic drain (A) clears condensate without an operator.

Air enters the first body, where solids and moisture are removed by the 40 um element and pressure is set to 0.15-0.9 MPa (20-130 psi). The lubricator then adds a metered oil mist last, so oil never passes back through the regulator seat. The circular gauge is fitted and reads MPa/psi for the default PT thread. With a 25 cc drain bowl and 36 cc oil bowl, this unit is sized for light-duty cycles where service visits are infrequent.

Airtac GAFC Air Service Unit GAFC200N08AS Technical Specifications

ModelAirtac GAFC Air Service Unit GAFC200N08AS
SeriesGAFC200 F.R.L. combination
Port size1/4" (PT thread)
Filtering grade40 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight590 g

Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.

Model Code: Airtac GAFC Air Service Unit GAFC200N08AS

GAFC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
(blank)PT thread; gauge scale MPa / psi.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.

Size Class & Flow Envelope

  • GAFC2001/8"-1/4" · 1750 L/min
  • GAFC3001/4"-1/2" · 3500 L/min
  • GAFC4003/8"-1/2" · 6000 L/min
  • GAFC5003/4" · 7000 L/min
  • GAFC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFC200 · 1/4" · curve to 1750 L/min
One size upGAFC300 (curve to 3500 L/min)
Build orderFilter & regulator → bracket → lubricator

Where the Airtac GAFC Air Service Unit GAFC200N08AS Is Used

precision_manufacturing

Small jig clamping

Feed a single pneumatic clamp on a benchtop assembly jig with clean, regulated, lubricated air at up to 0.9 MPa. The 1/4in port and 590 g weight suit compact frames where a larger unit would be overkill.

handyman

Bench press actuator

Power a small air cylinder on a manual bench press. The automatic drain keeps condensate out of the line during intermittent use, and the 36 cc oil bowl keeps the actuator lubricated through a shift.

factory

Single-station packaging

Supply a single-station carton taper or label applicator with conditioned air. The 25 cc drain bowl and 40 um element handle typical shop air, while the compact two-piece build fits tight machine frames.

Is the Airtac GAFC Air Service Unit GAFC200N08AS the Right Air-Prep Unit?

Choose the GAFC200N08AS for a compact 1/4in port line that needs filtered, regulated, lubricated air in one two-piece assembly. The nylon bowl is a build choice, but the shared specification of 1.0 MPa max and -5 to 70 C does not change with material, so confirm it suits your surroundings. The automatic drain is decisive for unattended or wet lines, while the standard type covers 0.15-0.9 MPa (20-130 psi) for most shop air. The 40 um element is the default; step to 5 um (W) only if you accept more frequent element service. The gauge is fitted and reads MPa/psi on the PT thread. Spares are orderable as GAFR200-08 and GAL200-08. If the line must stay oil-free, omit the lubricator and choose a plain GAFR instead. Max supply of 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan supply near 1.0 MPa if you need the full setting.

AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter-regulator first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 590 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.

Airtac GAFC Air Service Unit GAFC200N08AS FAQ

This F.R.L. combination operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It has a 25 cc drain bowl and a 36 cc oil bowl, and the complete unit weighs 590 g. The 1/4in port and 40 um element round out the core specification.

The N right after the body digits specifies a nylon bowl. It appears before the port code 08, so it is a bowl material code, not a no-gauge code. This unit has a circular gauge fitted, reading MPa/psi on the PT thread. The nylon bowl is a build choice, but the catalogue gives no impact or chemical data, so confirm it suits your environment.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFC Air Service Unit GAFC200N08AS

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFC200N08AS and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.