
The AirTAC GAFC Air Service Unit GAFC200N08ASW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAFC200N08ASW is a two-piece F.R.L. combination: a filter-regulator body handles filtration and pressure setting, then a separate lubricator adds a controlled oil mist. With a 1/4in port and a 590 g mass, it suits small jigs and single actuators where space is tight.
The nylon bowl holds 25 cc of condensate, while the oil bowl holds 36 cc. The 5 um element traps finer particles than the standard 40 um grade, making it a good match for precision valves. Working range is 0.15-0.9 MPa (20-130 psi) with a 1.0 MPa (145 psi) maximum.
| Model | Airtac GAFC Air Service Unit GAFC200N08ASW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic valve or pilot station where the 5 um element protects fine internal passages from particle wear.
Power a bench-mounted clamping jig in a repair shop, where the 590 g unit mounts easily on a light frame.
Supply a lab test rig needing clean, regulated air at moderate flow, with the automatic drain reducing maintenance between experiments.
Choose this GAFC200 when your line is 1/4in and you need finer filtration. The nylon bowl is a build choice - the shared specification of 1.0 MPa max and -5 to 70 C does not change with material, so confirm it suits your surroundings. The automatic drain clears condensate without an operator, ideal for unattended runs. A circular gauge is fitted, reading MPa/psi for the PT thread. The 5 um element means more frequent service than a 40 um grade. Spares are GAFR200-08 and GAL200-08, orderable separately. With max supply at 1.0 MPa, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, the oil bowl 36 cc, and the unit weighs 590 g. Use ISO VG 32 oil in the lubricator.
The W code specifies a 5 um filter element, which captures much finer particles than the 40 um standard. This suits precision valves or instrument air, but the finer element will load up faster and needs more frequent replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.