
The AirTAC GAFC Air Service Unit GAFC200N08LN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
The GAFC200N08LN is a two-piece F.R.L. combination: a filter and regulator share one body, and a lubricator mounts on the same T-bracket. With a 1/4in port, it regulates air to 0.15-0.4 MPa (20-58 psi) and filters to 40 um, while the nylon bowl holds 25 cc of condensate and the oil bowl holds 36 cc.
Air enters the first body where solids and moisture are removed and pressure is set, then the lubricator adds a metered oil mist downstream. This lower-pressure type tops out at 0.4 MPa, so if your machine may need more than that, this is the wrong unit. The 590 g assembly needs a proper panel mount, not support from the tubing.
| Model | Airtac GAFC Air Service Unit GAFC200N08LN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Set a lathe's air chuck to exactly 0.3 MPa (43 psi) with the lower-pressure regulator, avoiding over-clamping delicate workpieces.
Feed a small pneumatic press or riveting tool on a workbench, where the 590 g unit mounts easily to a frame or panel.
Supply a light-duty assembly station that runs at 0.35 MPa (51 psi), keeping the line within the L-type range.
Choose the GAFC200N08LN for a compact line feeding a single actuator or small jig where 0.4 MPa is the ceiling. The nylon bowl is a build choice - the catalogue gives no impact or chemical data, so confirm it suits your surroundings. The semi-auto drain dumps condensate on each pressure drop, with a manual drain for on-demand use. No gauge is fitted; the 1/8in gauge connection allows adding one later. The PT thread carries an MPa/psi scale if you fit a gauge. Spares are orderable as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, you have about 0.6 MPa above the 0.4 MPa top of the regulated range.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200N08LN operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc and the oil bowl 36 cc. Recommended lubricant is ISO VG 32. The unit weighs 590 g.
The N after the port code means no gauge is supplied. The 1/8in gauge connection is there if you add one later. The N before the port code indicates a nylon bowl. The gauge scale for the PT thread would be MPa/psi if a gauge is fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.