verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFC200 · F.R.L. Combination (Filter-Regulator + Lubricator)

Airtac GAFC Air Service Unit GAFC200N08LNK

The AirTAC GAFC Air Service Unit GAFC200N08LNK is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialNylon
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight590 g
$67.85 $76.12Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFC200-08 bowl, type and element option on one page All GAFC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFC Air Service Unit GAFC200N08LNK

This GAFC200N08LNK is an F.R.L. combination where the filter and regulator share one body, and a separate lubricator is mounted on the same bracket. It handles a 1/4in port and operates in the lower pressure band of 0.15-0.4 MPa (20-58 psi), with a 40 um element. The nylon bowl is specified by the N before the port code, and the unit weighs 590 g.

The two-piece layout means there is one less inter-unit joint to seal compared to a three-body filter, regulator and lubricator train. Air is filtered and set to pressure in the first body, then the lubricator adds a controlled oil mist last, so oil never passes back through the regulator seat. This model has no gauge fitted, so the 1/8in gauge connection is left for a later addition if needed.

Airtac GAFC Air Service Unit GAFC200N08LNK Technical Specifications

ModelAirtac GAFC Air Service Unit GAFC200N08LNK
SeriesGAFC200 F.R.L. combination
Port size1/4" (PT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight590 g

Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.

Model Code: Airtac GAFC Air Service Unit GAFC200N08LNK

GAFC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
(blank)Filtering grade 40 µm.
(blank)PT thread; gauge scale MPa / psi.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.

Size Class & Flow Envelope

  • GAFC2001/8"-1/4" · 1750 L/min
  • GAFC3001/4"-1/2" · 3500 L/min
  • GAFC4003/8"-1/2" · 6000 L/min
  • GAFC5003/4" · 7000 L/min
  • GAFC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFC200 · 1/4" · curve to 1750 L/min
One size upGAFC300 (curve to 3500 L/min)
Build orderFilter & regulator → bracket → lubricator

Where the Airtac GAFC Air Service Unit GAFC200N08LNK Is Used

precision_manufacturing

Low-pressure jig clamping

Feed a single-acting clamp on a benchtop assembly jig where the actuator is sized for a 0.3 MPa grip force and the line pressure never needs to go higher.

science

Lab air bench

Supply a small pneumatic test fixture on a laboratory bench where a regulated 0.25 MPa is the setpoint for a delicate diaphragm valve, and the lower range gives finer adjustment.

handyman

Paint booth air prep

Prepare air for a manual spray gun in a paint booth where the regulator is set to 0.35 MPa and the lubricator adds a fine oil mist to the tool.

Is the Airtac GAFC Air Service Unit GAFC200N08LNK the Right Air-Prep Unit?

Choose this GAFC200N08LNK when your line needs 1/4in ports and a regulated ceiling of 0.4 MPa. The L type tops out at 0.4 MPa, so if the machine may ever need more, this is the wrong part. The nylon bowl is a build choice, but the catalogue gives no impact or chemical data, so confirm it suits your surroundings. The semi-auto drain dumps condensate on each pressure drop, and the manual drain is there for on-demand use. The reverse-flow (reflux) valve is fitted, and the catalogue draws it as a separate pneumatic symbol. The 40 um element is the standard grade. Spares are the GAFR200-08 filter-regulator and the GAL200-08 lubricator, both orderable separately. With a 1.0 MPa max supply, you have about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.

AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter-regulator first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 590 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.

Airtac GAFC Air Service Unit GAFC200N08LNK FAQ

The GAFC200N08LNK operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C and it must not freeze. The drain bowl holds 25 cc and the oil bowl holds 36 cc. Recommended lubricant is ISO VG 32, and the unit weighs 590 g.

The N after the port code means no gauge is supplied with this unit. If you need to read the set pressure, you will have to add one. The gauge connection on a GAFC200 is 1/8in, so a standard 1/8in gauge can be fitted later.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFC Air Service Unit GAFC200N08LNK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFC200N08LNK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.