
The AirTAC GAFC Air Service Unit GAFC200N08LW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
This AirTAC GAFC200N08LW is a compact F.R.L. combination that pairs a filter-regulator with a lubricator on a single T-bracket. The filter and regulator share one body, so the set is two pieces instead of three, with one less inter-unit joint to seal. Air is cleaned and set to pressure in the first body, then the lubricator adds a metered oil mist downstream, so oil never travels back through the regulator seat.
The 1/4in port and 590 g mass place it in the smallest GAFC size class, suited to a single actuator or small jig. It regulates from 0.15 to 0.4 MPa (20-58 psi) with a 5 um element that traps finer particles for sensitive valves. The nylon bowl is named as a build choice, but the shared specification of 1.0 MPa max and -5 to 70 C applies regardless of material, so confirm it suits your surroundings.
| Model | Airtac GAFC Air Service Unit GAFC200N08LW |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic clamp on a CNC fixture with the 1/4in port and 5 um element, ensuring clean, regulated air at a stable lower pressure for consistent part holding.
Use it to supply a sensitive lab valve or small test rig that requires fine filtration and a limited pressure band, with the lower range protecting delicate components.
Power a handheld screwdriver or small cylinder on a manual assembly bench, where the compact size and lower pressure setting suit light-duty, operator-controlled tasks.
For a GAFC200, the port options are 1/8in (06) or 1/4in (08); this model uses the larger 1/4in port. The nylon bowl (N) is a material choice, while the L code sets the lower pressure range of 0.15-0.4 MPa (20-58 psi), which tops out well below the standard 0.9 MPa ceiling. If your machine may ever need more than 0.4 MPa, the L type is the wrong part. The 5 um element (W) filters finer than the standard 40 um, but will need more frequent service. A circular gauge is fitted, reading MPa/psi for the default PT thread. The semi-auto drain dumps condensate on pressure drop, with a manual backup. Spares are orderable as GAFR200-08 and GAL200-08. If the line must stay oil-free, omit the lubricator and choose a plain GAFR instead. Max supply of 1.0 MPa leaves about 0.6 MPa above the 0.4 MPa top of the range, so there is ample inlet headroom for regulation.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
It operates at 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 25 cc drain bowl and a 36 cc oil bowl, and weighs 590 g. Recommended lubricant is ISO VG 32.
The L code sets the pressure range to 0.15-0.4 MPa (20-58 psi), which is about 44% of the standard type's 0.9 MPa ceiling. This is for applications that need a limited, lower pressure band. If you might need more pressure later, the standard S type would be a safer choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.