
The AirTAC GAFC Air Service Unit GAFC200N08SN is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This AirTAC GAFC200N08SN is a two-piece F.R.L. combination: a filter-regulator body paired with a lubricator on a shared T-bracket. Air enters the 1/4in port, gets filtered and regulated to 0.15-0.9 MPa (20-130 psi), then oil mist is metered in downstream. The nylon bowl holds 25 cc of condensate while the oil bowl holds 36 cc, and the whole unit weighs 590 g.
The 40 um element handles standard shop air, and the semi-auto drain dumps condensate each time pressure drops while the manual drain works on demand. No gauge is fitted, so the 1/8in gauge connection is where one would be added. The catalogue flow curve plots to 1750 L/min at 0.7 MPa inlet, useful for sizing against a neighbouring body.
| Model | Airtac GAFC Air Service Unit GAFC200N08SN |
|---|---|
| Series | GAFC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 590 g |
Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFC200 is 1/8" if you add one.
| GAFC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAFC300 (curve to 3500 L/min) |
| Build order | Filter & regulator → bracket → lubricator |
Feed a small pneumatic bench press with regulated air and a fine oil mist for the cylinder seals. The 1/4in port and 590 g mass suit a compact machine frame without overbuilding the mount.
Supply a paint booth's air tools with filtered, regulated air at 0.15-0.9 MPa. The 25 cc condensate bowl handles moisture from humid compressor lines, and the manual drain works when the booth is idle.
Run a short conveyor section's single stop cylinder from this unit. The 36 cc oil bowl keeps the actuator lubricated between shifts, and the semi-auto drain clears water on each machine stop.
Choose this GAFC200N08SN when a 1/4in port suits a small actuator or jig and you want the nylon bowl without a gauge. The nylon bowl is a build choice, but the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm it suits your surroundings. The semi-auto plus manual drain pair means condensate clears on pressure drops or on demand, while the 40 um element is the standard grade for general use. If you need finer filtration, the W option swaps in a 5 um element, and the K option adds a reverse-flow valve. The two units are orderable separately as GAFR200-08 and GAL200-08, so a clogged element does not force a full replacement. Max supply of 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan the inlet pressure accordingly.
AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.
The GAFC200N08SN operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. The drain bowl holds 25 cc, the oil bowl holds 36 cc, and the unit weighs 590 g.
The N after the port code means no gauge is supplied with this unit. If you need to read the set pressure, the GAFC200 body has a 1/8in gauge connection where you can add one. The PT thread option means a gauge with an MPa/psi scale would match the default thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.