verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFC200 · F.R.L. Combination (Filter-Regulator + Lubricator)

Airtac GAFC Air Service Unit GAFC200N08SW

The AirTAC GAFC Air Service Unit GAFC200N08SW is a genuine two-piece F.R.L. combination — a GA-series filter & regulator and a lubricator pre-assembled on one T-shape bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination
  • Port size1/4"
  • Pressure range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • Bowl materialNylon
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, MPa / psi
  • Weight590 g
$62.38 $70.27Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFC200-08 bowl, type and element option on one page All GAFC200-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFC Air Service Unit GAFC200N08SW

This two-piece F.R.L. combination pairs a filter-regulator body with a separate lubricator, joined on a T-bracket with quick clamps. The 1/4in port and 590 g mass suit it for compact machine frames where a full three-body train would be overkill. Air enters, solids and moisture drop out in the 25 cc drain bowl, pressure is set to 0.15-0.9 MPa (20-130 psi), then the lubricator meters ISO VG 32 oil mist into the flow.

The 5 um element traps finer particles than the standard 40 um grade, which protects precision valves but means more frequent element checks. A circular gauge is fitted, reading MPa/psi on the PT thread. The nylon bowl is a build choice; the shared specification of -5 to 70 C and 1.0 MPa max applies regardless, so confirm it suits your environment. The 36 cc oil bowl extends time between refills for a single actuator or small jig.

Airtac GAFC Air Service Unit GAFC200N08SW Technical Specifications

ModelAirtac GAFC Air Service Unit GAFC200N08SW
SeriesGAFC200 F.R.L. combination
Port size1/4" (PT thread)
Filtering grade5 µm
Pressure range0.15 - 0.9 MPa (20 - 130 psi)
TypeStandard
Bowl materialNylon
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
Capacity of oil bowl36 cc
Recommended lubricantISO VG 32 or equivalent
Weight590 g

Specifications follow the official AirTAC GAFC catalogue (pages 219-220). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.

Model Code: Airtac GAFC Air Service Unit GAFC200N08SW

GAFC200GA200 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
08Port size 1/4". This body offers 06 = 1/8", 08 = 1/4".
(blank)Drain: Semi-auto drain + manual drain.
SStandard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
(blank)PT thread; gauge scale MPa / psi.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAFR200-08 filter & regulator, GAL200-08 lubricator — both share this body and port. A GAFC has two units, not three: the filter and the regulator are one body.

Size Class & Flow Envelope

  • GAFC2001/8"-1/4" · 1750 L/min
  • GAFC3001/4"-1/2" · 3500 L/min
  • GAFC4003/8"-1/2" · 6000 L/min
  • GAFC5003/4" · 7000 L/min
  • GAFC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFC200 · 1/4" · curve to 1750 L/min
One size upGAFC300 (curve to 3500 L/min)
Build orderFilter & regulator → bracket → lubricator

Where the Airtac GAFC Air Service Unit GAFC200N08SW Is Used

precision_manufacturing

Precision Valve Protection

Feed a 5 um-filtered, regulated supply to a pneumatic positioner on a packaging line, where fine particles would otherwise wear the spool.

handyman

Small Jig Actuation

Power a single clamping cylinder on a benchtop assembly fixture, with the 25 cc drain bowl catching condensate from intermittent use.

science

Lab Air Supply

Provide clean, oil-misted air at 0.15-0.9 MPa to a small test rig, where the 36 cc oil bowl supports extended runs without refill.

Is the Airtac GAFC Air Service Unit GAFC200N08SW the Right Air-Prep Unit?

Choose the GAFC200 body when a 1/4in port and 590 g weight fit your layout; the flow curve plots to 1750 L/min at 0.7 MPa inlet, useful for sizing against the larger GAFC300's 3500 L/min envelope. The nylon bowl is specified here, but PC and metal options exist with the same pressure and temperature ratings. This model carries the semi-auto drain, which dumps on pressure drop, plus a manual drain for on-demand use. The 5 um element suits instrument air; the standard 40 um grade is the blank default. The PT thread pairs with a MPa/psi gauge scale. Spares are orderable as GAFR200-08 and GAL200-08. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan inlet pressure carefully if you need the full output.

AirtacDistr lists every GAFC200-08 order code with its price on one page at https://airtacdistr.com/products/airtac-gafc200-08-two-unit-frl

Quick checklist

  • ✓ Body size for your peak flow (1/4" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter-regulator first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 590 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a plain GAFR200-08 filter-regulator on that branch instead of the full combination.

Airtac GAFC Air Service Unit GAFC200N08SW FAQ

The working pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C. It has a 25 cc drain bowl and a 36 cc oil bowl, weighs 590 g, and uses ISO VG 32 lubricant. The element is 5 um.

The N in the code specifies a nylon bowl, which is one of three material options (PC, metal, nylon) for the GAFC200. The catalogue does not publish different temperature or pressure ratings for the materials, so the choice is about your installation environment. Confirm nylon suits your surroundings before ordering.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFC Air Service Unit GAFC200N08SW

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFC200N08SW and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.