
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ALNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ALNT is a filter and regulator combined into a single housing, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This 1/8in unit works in the lower pressure band of 0.15-0.4 MPa (20-58 psi) and uses a 40 um filter element.
Because the filter and regulator share one body, there are fewer joints to seal compared to a separate filter plus regulator, which also saves space on the rail. The automatic drain clears condensate from the 25 cc bowl without manual attention, and the balanced regulator holds the set pressure as supply varies. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ALNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or small positioning jig on a benchtop assembly station where space is tight and the lower pressure range protects delicate parts.
Supply a small air tool or blow gun on a service bench, with the automatic drain keeping the bowl clear during intermittent use.
Provide filtered, regulated air to a laboratory fixture or test rig that operates below 0.4 MPa, where the 40 um element removes water and solids from the line.
Choose this GAFR200 when your application needs a compact 1/8in unit with a lower pressure ceiling of 0.4 MPa. The automatic drain suits unattended or wet lines, while the included mounting bracket simplifies installation. The PC bowl is the standard build, and the 40 um element handles general workshop air; if you need finer filtration, select the W option for a 5 um element. This model has no gauge, so the 1/8in gauge connection is available if you add one later. For lines that need oil downstream, order the matching GAFC200-06 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of this unit's regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/8in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), and a temperature range of -5 to 70 C. The drain bowl holds 25 cc, and the unit weighs 290 g.
The A code means an automatic drain is fitted, so condensate is expelled automatically without manual operation. This is ideal for wet lines or locations where someone cannot regularly check the bowl. The bowl itself is polycarbonate (PC), and the unit has no gauge, so you would need to add one to read the outlet pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.