verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR200 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT

The AirTAC GAFR Adjustable Filter Regulator GAFR20006ALNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight290 g
$39.52 $47.02Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR200-06 bowl, gauge and thread option on one page All GAFR200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT

The GAFR20006ALNWT is a filter and regulator combined into a single compact body, saving rail space and reducing potential leak points compared to separate units. It delivers lower-pressure regulation from 0.15 to 0.4 MPa (20-58 psi) and uses a 5 um element to trap fine particles.

This model features an automatic drain that ejects condensate without manual intervention, and its 25 cc bowl collects water and solids separated by the internal diversion structure. The unit weighs just 290 g and has no gauge fitted, but the 1/8" gauge connection allows one to be added later. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR20006ALNWT
SeriesGAFR200 filter & regulator
Port size1/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
BracketIncluded
Weight290 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT

GAFR200GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
06Port size 1/8". This body offers 06 = 1/8", 08 = 1/4".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Mounting bracket included.
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR200 · 1/8" · curve to 2000 L/min
One size upGAFR300 (curve to 3500 L/min)
Add a lubricatorGAFC200-06 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT Is Used

precision_manufacturing

Precision valve protection

Feed a single precision pneumatic valve or small instrument with 5 um filtered air at a stable lower pressure, protecting internal orifices from particle wear.

handyman

Compact bench jig

Mount this lightweight 290 g unit directly on a small assembly jig or test fixture to provide clean, regulated air to a single clamping cylinder.

science

Lab air supply point

Use the automatic drain and fine 5 um filtration to supply a laboratory air bench where consistent lower pressure and minimal manual maintenance are priorities.

Is the Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT the Right Air-Prep Unit?

Choose the GAFR200 body for small jigs, single actuators, or point-of-use filtration where 1/8" ports and a 290 g mass suit the layout. The 5 um element captures finer particles than the standard 40 um grade, making it suitable for precision valves, though it will require more frequent servicing. The automatic drain (A) handles wet or unattended lines, while the included mounting bracket simplifies installation. With the lower-pressure type (L), the regulated band tops out at 0.4 MPa, so verify your system never needs more than that. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If oil is needed downstream, order the matching GAFC200-06 combination instead. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 290 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT FAQ

The GAFR20006ALNWT is a filter & regulator with a 1/8" port, lower-pressure range of 0.15-0.4 MPa (20-58 psi), maximum pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 5 um element, automatic drain, and a 25 cc condensate bowl. The unit weighs 290 g and has no gauge fitted.

The 'W' code specifies a 5 um element, which traps significantly finer solid particles than the standard 40 um grade. This is chosen for applications with precision valves or sensitive instruments, but the finer element will load up faster and require more frequent replacement or cleaning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR20006ALNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.