
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ALNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ALNWTK is a filter and regulator combined into a single body, saving space on a compact machine or jig. It handles a 1/8in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi) with a 5 um element for finer filtration.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced regulator holds the outlet steady as supply pressure varies. The pressed-in self-locking knob resists drift from vibration, keeping the set pressure stable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ALNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single precision pneumatic valve or a small instrument loop that needs clean, regulated air at a stable lower pressure.
Mount on a benchtop assembly jig where a 1/8in port and 290 g weight keep the footprint small and the setup simple.
Supply a lab fixture or test stand that requires filtered air at a controlled low pressure without taking up much rail space.
This GAFR200 model is the smallest in the series, with a 1/8in port and a 290 g mass that suits a small jig or a single actuator. The 5 um element traps finer particles than the standard 40 um, making it a good fit for precision valves or instrument air, though it will need more frequent service. The automatic drain handles condensate without manual attention, ideal for wet or unattended lines, while the included mounting bracket simplifies panel installation. The lower-pressure type tops out at 0.4 MPa, so if the machine may ever need more, this is the wrong part. The no-gauge version leaves a 1/8in gauge connection if you add one later, and the NPT thread carries an MPa/psi scale. The reverse-flow valve is fitted as an ordering difference. If oil is needed downstream, the matching GAFC200-06 combination adds a lubricator. With a 1.0 MPa max supply, you have about 0.6 MPa of headroom above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The pressure range is 0.15-0.4 MPa (20-58 psi), with a max pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C and it must not freeze. The drain bowl holds 25 cc and the unit weighs 290 g.
The automatic drain (A code) expels condensate from the 25 cc bowl without manual intervention, which suits wet or unattended lines. This model has it, so there is no semi-auto or manual drain option fitted.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.