
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ALTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ALTK is a filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. It filters incoming air through a diversion structure that spins out liquid water and solid particles, then regulates the outlet pressure with a balanced, self-locking mechanism that resists drift from vibration. This model has a 1/8in port, a lower-pressure range of 0.15-0.4 MPa (20-58 psi), and a 40 um element.
With a 25 cc condensate bowl and a weight of just 290 g, this compact unit is ideal for small jigs or single actuators where space is tight. The automatic drain (A) clears condensate without manual intervention, and the reverse-flow (reflux) valve is fitted as an ordering difference. The circular gauge with MPa/psi scale is included, and the mounting bracket comes standard. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ALTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic cylinder on a benchtop assembly jig with clean, regulated air at a stable lower pressure.
Supply a laboratory test fixture that requires a precise, low-pressure air source with automatic condensate removal.
Protect a sensitive pressure sensor or gauge from water and particulate contamination in a compact instrument panel.
Choose the GAFR200 body for small, low-flow applications; the GAFR300 with its 60 cc bowl and 3500 L/min plotted envelope at 0.7 MPa inlet is the next step up if you need more capacity. The PC bowl is the standard build choice, and the automatic drain (A) suits unattended or wet lines, while the blank drain option would have included both semi-auto and manual drains. The L-type pressure range tops out at 0.4 MPa, so confirm your supply never needs more than that; This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If your line needs oil downstream, order the matching GAFC200-06 combination instead, as this unit does not lubricate. The reflux valve is fitted per the K code. Note that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The port is 1/8in, the element is 40 um, and the drain is automatic.
The K code indicates a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference from models without the K code; the catalogue defers the detailed function of this valve to a separate page not included in our data.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.