
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ASJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ASJNT is a compact filter and regulator combined into a single body, eliminating the need for separate GAF and GAR units. This 1/8in port model handles 0.15-0.9 MPa (20-130 psi) and comes with a 40 um element, while its 25 cc condensate bowl captures separated water and solids.
Its balanced regulator mechanism holds the outlet pressure steady as supply varies, and the pressed-in self-locking knob resists drift from vibration. The automatic drain clears condensate without manual intervention, making it suitable for tight spaces where a 290 g unit can be mounted on a small jig or single actuator. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ASJNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or small positioning jig on an assembly bench. The 1/8in port and 290 g weight fit tight machine frames, while the automatic drain keeps the 25 cc bowl from overflowing during long shifts.
Supply a small air tool or manual workbench station where space is limited. The filter removes water and particles before regulation, protecting the tool's internal mechanism from contamination.
Use on a test bench with a single pneumatic component under evaluation. The balanced regulator maintains stable outlet pressure during supply fluctuations, giving reliable data from your prototype setup.
Choose the GAFR200 body for small machines with 1/8in ports; its 2000 L/min flow envelope at 0.7 MPa inlet suits single actuators or compact jigs. The PC bowl is the standard build, while the automatic drain (A) handles wet lines without manual checks. This model omits the mounting bracket (J) and gauge (N), so plan for panel mounting and add a gauge via the 1/8in connection if you need to read set pressure. The 40 um element is the default; upgrade to 5 um (W) for finer filtration. If you need lubrication downstream, order the matching GAFC200-06 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR20006ASJNT is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.9 MPa (20-130 psi), max pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). Operating temperature is -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g, with a 40 um element and automatic drain.
The J code omits the mounting bracket for panel-mount installations or existing brackets, while the N code means no gauge is supplied. The gauge connection is 1/8in if you add one later. Without a gauge, you cannot read the set pressure directly, so use a downstream gauge or the regulator's adjustment scale.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.