
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ASNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ASNT is a compact filter and regulator combined into a single body, eliminating the need for separate filter and regulator units on a small pneumatic line. It delivers 1/8in porting with a standard 0.15-0.9 MPa (20-130 psi) adjustment range and a 40 um filter element, all in a 290 g package.
This unit spins incoming air to separate liquid water and solid particles into its 25 cc condensate bowl, while the balanced regulator holds the set outlet pressure steady as supply varies. The automatic drain clears collected condensate without manual attention, and the pressed-in self-locking knob resists drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ASNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture cylinder on a benchtop assembly station, where 1/8in porting and a 290 g body fit neatly into a compact control panel.
Protect a single air tool or a small valve manifold from water and particulates right at the point of use, with the automatic drain handling condensate in low-duty cycles.
Regulate air for a small laboratory fixture or test rig that needs a steady 0.15-0.9 MPa supply, with the 40 um element trapping particles before the device.
Choose the GAFR200 for small jigs, single actuators, or point-of-use stations where 1/8in porting matches the tubing. The automatic drain (A) suits unattended or wet lines, while the included mounting bracket lets you fix the 290 g body to a panel instead of supporting it from the piping. This model has no gauge fitted, so the 1/8in gauge connection is available if you add one later; the NPT thread carries an MPa/psi scale. If your line needs oil downstream, order the matching GAFC200-06 combination rather than this unit, which does not lubricate. The 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan a supply near 1.0 MPa if you intend to run at the upper setpoint.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR20006ASNT is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.9 MPa (20-130 psi), max pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The 40 um element filters solids, and the automatic drain clears condensate.
The N code after the port means no gauge is supplied, which saves cost when you have a separate pressure readout or do not need one. The gauge connection is 1/8in, so you can add an AirTAC gauge later if you need to read the set pressure directly on the unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.