
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ASNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ASNWTK is a filter and regulator combined into one compact body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/8in port with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and uses a 5 um element for finer filtration.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl. The automatic drain clears condensate without manual intervention, and the pressed-in self-locking knob maintains the set pressure despite vibration. This unit does not include a lubricator. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ASNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic jig or fixture with stable, filtered air at a regulated pressure, ensuring consistent clamping force.
Supply a small bench-mounted press or air tool with clean air, protecting internal components from particulates and moisture.
Provide 5 um filtered air to a sensitive laboratory instrument or gauge, reducing the risk of contamination.
Choose this GAFR200 for small jigs or single actuators needing clean, regulated air at a 1/8in port. The 5 um element traps finer particles than the standard 40 um, suitable for precision valves, though it may require more frequent service. The automatic drain is ideal for unattended operation or wet lines, while the included mounting bracket simplifies installation. No gauge is fitted, but the 1/8in gauge connection allows adding one later. The reverse-flow valve is attached as an ordering option. For lines needing lubrication downstream, order the matching GAFC200-06 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/8in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g.
The 'K' indicates that a reverse-flow (reflux) valve is fitted to this unit. This is an ordering difference; the specific function of the valve is detailed in the catalogue pages not included in our data.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.