
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ASWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ASWTK is a genuine AirTAC filter & regulator, combining both functions in a single body. It spins incoming air to separate liquid water and trap solid particles, then delivers a steady outlet pressure via a balanced, self-locking regulator. This model has a 1/8in port, a 5 um element, and an automatic drain, with a working range of 0.15-0.9 MPa (20-130 psi).
The unit weighs 290 g and has a 25 cc condensate bowl, making it a compact choice for small jigs or single actuators. Its pressed-in knob resists drift from vibration, and the integrated design means fewer joints to seal than a separate filter plus regulator. A reverse-flow valve is fitted as an ordering difference, and the mounting bracket is included. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ASWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic jig or fixture on a benchtop assembly station, where the 1/8in port and 290 g weight suit compact layouts.
Provide filtered, regulated air to a small air tool or blow-off nozzle at a workbench, with the automatic drain reducing maintenance.
Supply a sensitive instrument or pilot valve with 5 um filtered air, protecting internal orifices from fine particle wear.
Choose this GAFR200 for a 1/8in port, the smallest body in the GAFR series. The 5 um element traps finer particles than the standard 40 um, suitable for precision valves or instrument air, though it will need more frequent service. The automatic drain handles condensate without manual intervention, ideal for wet lines or unattended operation. The included bracket simplifies mounting, and the NPT thread means the fitted gauge reads in MPa/psi. If you need oil downstream, order the matching GAFC200-06 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR20006ASWTK is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.9 MPa (20-130 psi), maximum pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g.
The 'K' indicates that a reverse-flow (reflux) valve is fitted to this unit. It is an ordering difference; the catalogue does not detail its function. This model also has an automatic drain ('A') and a 5 um element ('W').
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.