
The AirTAC GAFR Adjustable Filter Regulator GAFR20006LJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006LJNWT is a compact filter and regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles 1/8in ports and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for finer filtration.
This model comes without a bracket or gauge, and uses a PC bowl with both semi-auto and manual drains. Weighing just 290 g, it suits small jigs or single actuators where precise low-pressure control is needed and space is tight. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006LJNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small pneumatic clamp or precision valve that requires a stable, low regulated pressure. The 5 um element protects sensitive internals from fine particulates.
Mount on a small bench fixture or test rig where space is limited. The lightweight 290 g body and 1/8in port integrate easily into tight layouts.
Provide clean, low-pressure air for lab equipment that operates below 0.4 MPa. The fine 5 um filtration helps maintain consistent conditions for delicate instruments.
Choose the GAFR200 body for small-bore applications; the 1/8in port and 25 cc drain bowl indicate a light-duty role. The L type limits output to 0.15-0.4 MPa (20-58 psi), so confirm your system never needs more than that. The 5 um element traps finer particles for sensitive equipment, while the PC bowl and semi-auto+manual drain suit dry, indoor conditions. No bracket (J) means you must provide your own mounting; no gauge (N) means you cannot read set pressure without adding one to the 1/8in connection. If oil is needed downstream, order the matching GAFC200-06 combination instead. The 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/8in port, a working pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The unit uses a 5 um element and comes without a gauge or bracket.
The 'N' code means no gauge is fitted, so you cannot read the outlet pressure without adding one to the 1/8in gauge connection. The 'J' code means no mounting bracket is included, so you must mount it using your own panel or frame. These options reduce cost when you already have a gauge or mounting solution.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.