verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAFR200 · Filter & Regulator (Filter + Pressure Regulator, One Body)

Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT

The AirTAC GAFR Adjustable Filter Regulator GAFR20006LJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.

  • TypeFilter & regulator
  • Port size1/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight290 g
$35.35 $42.85Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAFR200-06 bowl, gauge and thread option on one page All GAFR200-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT

The GAFR20006LJWT is a filter and regulator combined into a single body, so incoming air is spun to separate liquid water and solid particles before a balanced regulator sets a steady outlet pressure. This lower-pressure version regulates from 0.15 to 0.4 MPa (20-58 psi) and uses a 5 um element for finer filtration.

With a 1/8in port and 290 g mass, this compact unit suits small jigs or single actuators where space is tight. The 25 cc condensate bowl collects what the diversion filter removes, and the pressed-in self-locking knob resists set-pressure drift from vibration. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT Technical Specifications

ModelAirtac GAFR Adjustable Filter Regulator GAFR20006LJWT
SeriesGAFR200 filter & regulator
Port size1/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl25 cc
BracketNot included (J)
Weight290 g

Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.

Model Code: Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT

GAFR200GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
06Port size 1/8". This body offers 06 = 1/8", 08 = 1/4".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
JNo bracket (J) — supplied without the mounting bracket.
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.

Size Class & Flow Envelope

  • GAFR2001/8"-1/4" · 2000 L/min
  • GAFR3001/4"-1/2" · 3500 L/min
  • GAFR4003/8"-1/2" · 7000 L/min
  • GAFR5003/4" · 8000 L/min
  • GAFR6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAFR200 · 1/8" · curve to 2000 L/min
One size upGAFR300 (curve to 3500 L/min)
Add a lubricatorGAFC200-06 (F.R.L. combination)

Where the Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT Is Used

precision_manufacturing

Small jig actuation

Feed a single pneumatic clamp or fixture cylinder on a benchtop assembly station where the 1/8in port matches the small bore and the 5 um element protects the valve pilot.

handyman

Bench test rig

Supply a laboratory or workshop test fixture with regulated air at up to 0.4 MPa, using the manual drain to purge condensate after each shift.

build

Compact machine builder

Mount inside a control cabinet for a small indexing table, where the 290 g weight and bracket-less design allow direct panel mounting without extra rail width.

Is the Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT the Right Air-Prep Unit?

Choose GAFR200 for small-bore circuits; the 1/8in port and 290 g weight place it below the GAFR300 (500 g, 60 cc bowl) when flow demand is modest. The PC bowl (blank code) is the standard build, while the 5 um element traps finer particles than the 40 um default for precision valves. This model ships with both semi-auto and manual drains, a fitted circular gauge (MPa/psi scale), and no mounting bracket (J) for panel-mount installations. If the line needs oil downstream, order the matching GAFC200-06 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.

Quick checklist

  • ✓ Body size for your peak flow (1/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Bracket kept or removed (J); add a lubricator = GAFC
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
  • check Drain condensate before the 25 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 290 g unit on its bracket, not on the tubing.

This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.

Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT FAQ

Pressure range is 0.15-0.4 MPa (20-58 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature -5 to 70 C. The drain bowl holds 25 cc and the unit weighs 290 g with a 1/8in port and 5 um element.

The J code omits the bracket for installations where the unit is panel-mounted or secured by existing hardware. The 290 g body is light enough for such mounting, but you must provide your own fixing method since no bracket ships with this model.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR20006LJWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAFR20006LJWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.