
The AirTAC GAFR Adjustable Filter Regulator GAFR20006SJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006SJNWT is a filter and regulator combined into a single body, saving space and reducing potential leak points compared to separate units. This 1/8in port model handles a standard pressure range of 0.15-0.9 MPa (20-130 psi) and comes with a 5 um element for finer filtration.
Its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced regulator maintains a steady outlet pressure. Weighing just 290 g, this compact unit is ideal for small jigs and single actuators, though it requires a proper panel mount since no bracket is included. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006SJNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture with clean, regulated air. The 5 um element protects sensitive valves from fine particulates that could cause sticking or wear.
Mount this compact unit on a panel or frame to supply a small workbench station. Its light 290 g weight and 1/8in port fit neatly into tight control cabinets.
Use in prototype machines where space is at a premium and precision matters. The integrated filter-regulator simplifies plumbing and reduces potential leak points in experimental setups.
Choose the GAFR200 for small pneumatic circuits needing 1/8in ports. The 5 um element traps finer particles than the standard 40 um, making it suitable for precision valves, though it will require more frequent service. The semi-auto drain combines automatic condensate release with a manual override, and the PC bowl offers a clear view of the collected water. This model omits the mounting bracket (J) and gauge (N), so plan for panel mounting and add a gauge via the 1/8in connection if needed. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If oil is needed downstream, order the matching GAFC200-06 combination instead. Remember, 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR20006SJNWT operates from 0.15 to 0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C and must not freeze. The drain bowl holds 25 cc and the unit weighs 290 g.
The J code omits the mounting bracket for panel-mount installations, while the N code means no gauge is supplied. The 1/8in gauge connection remains available if you need to add one later. This configuration suits buyers who have existing brackets or prefer to source their own gauge.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.