
The AirTAC GAFR Adjustable Filter Regulator GAFR20006SJWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006SJWT is a compact filter and regulator combined into a single body, saving valuable rail space on small automation cells. It handles a 1/8in port with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particles before they reach sensitive valves.
This unit's diversion structure spins incoming air to separate liquid water and solid debris into the 25 cc condensate bowl, while the balanced regulator holds your set pressure steady as supply fluctuates. With no lubricator built in, it is a pure filtration and pressure control solution for clean, oil-free air preparation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006SJWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or small positioning jig on an assembly bench. The 1/8in port and 290 g weight suit tight spaces, while the 5 um element protects fine metering valves from particle wear.
Provide filtered, regulated air to a laboratory test fixture or small analytical instrument. The 25 cc bowl handles modest condensate volumes, and the clear PC bowl lets you monitor moisture levels at a glance.
Supply a small pneumatic hand tool or blow-off nozzle on a workbench. The semi-auto drain purges accumulated water automatically, while the manual drain gives you control for scheduled maintenance.
Choose this GAFR200 body for compact machines, single actuators, or small jigs where space is tight and flow demands are modest. The 1/8in port suits low-consumption circuits; if you need more capacity, step up to the GAFR300 body with its 3500 L/min plotted flow envelope at 0.7 MPa inlet. The PC bowl offers clear condensate visibility, while the 5 um element provides finer filtration than the standard 40 um grade for precision pneumatic controls. This model ships without a mounting bracket (J code), so plan for panel mounting or use your existing bracket. The semi-auto and manual drains are both fitted, allowing either automatic purging or manual operation. The circular gauge with MPa/psi scale is included, and the NPT thread matches common local fittings. If your line needs lubrication downstream, order the matching GAFC200-06 combination instead. Remember that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so keep inlet pressure near 1.0 MPa to achieve the full 0.9 MPa output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR20006SJWT operates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C. It has a 1/8in port, 25 cc drain bowl, and weighs 290 g. The 5 um element filters fine particles, and the gauge shows MPa/psi.
The J code in GAFR20006SJWT means the mounting bracket is omitted. This suits installations where the unit will be panel-mounted or attached to an existing bracket structure. If you need the standard bracket, order the version without the J code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.