
The AirTAC GAFR Adjustable Filter Regulator GAFR20006ST is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR20006ST is a filter and regulator combined into a single body, handling both filtration and pressure control for compact pneumatic circuits. It uses a 1/8in port, operates from 0.15-0.9 MPa (20-130 psi), and comes with a 40 um element to catch solid particles.
This unit weighs 290 g and has a 25 cc condensate bowl, making it suitable for small jigs or single actuators. The diversion structure spins incoming air to separate liquid water and solids, while the balanced, self-locking regulator holds the set pressure steady against supply variations. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR20006ST |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp on a benchtop assembly fixture. The 1/8in port and 290 g weight let you mount it close to the cylinder without a heavy support structure.
Supply a controlled air pressure to a prototype valve or sensor on a test bench. The 40 um element protects the device from particles, and the gauge shows the set point at a glance.
Provide filtered, regulated air to a small air cylinder on a drill or press. The 25 cc bowl is adequate for low condensate volumes, and the self-locking knob resists drift from machine vibration.
Choose the GAFR20006ST for small-scale applications where space is tight and a 1/8in port matches your tubing. The PC bowl is the standard option, and the included mounting bracket simplifies installation on a panel or frame. This model has a semi-auto drain plus a manual drain, so you can either let it purge automatically or operate it by hand.
The 40 um element handles general workshop air, and the fitted circular gauge with an MPa/psi scale lets you read the outlet pressure directly. If your line needs oil downstream, the matching GAFC200-06 combination adds a lubricator. A 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure near 1.0 MPa if you intend to run at the upper limit.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR20006ST is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.9 MPa (20-130 psi), maximum pressure of 1.0 MPa (145 psi), and proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The element is 40 um, and the gauge reads MPa/psi.
The GAFR20006ST combines both functions in one body, so you do not need separate GAF and GAR units. It filters the air and regulates the pressure in a single compact package, reducing the number of joints to seal and saving rail space compared to a two-part setup.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.