
The AirTAC GAFR Adjustable Filter Regulator GAFR200C06ALJWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
This AirTAC GAFR200C06ALJWTK is a filter and regulator combined into a single body, saving space and reducing potential leak points compared to separate units. It delivers air filtered to 5 um and regulated to a lower pressure band of 0.15-0.4 MPa (20-58 psi), with a metal bowl and an automatic drain for wet or unattended lines.
The unit's diversion structure spins the air to separate liquid water and solid particles into the 25 cc drain bowl, while the balanced, self-locking regulator maintains the set outlet pressure despite supply variations. At 290 g with a 1/8" port, it suits compact machines or single actuators where precise, low-pressure control is needed. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06ALJWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small pneumatic clamp or fixture that requires a stable, low-pressure air supply to avoid damaging delicate parts during assembly.
Provide filtered, regulated air at a controlled low pressure to a laboratory instrument or test setup that is sensitive to pressure fluctuations.
Power a small air tool or a single-acting cylinder on a workbench where space is limited and a lower pressure setting is required for safe operation.
Choose this GAFR200 for small jigs or single actuators needing a 1/8" port and a lower 0.15-0.4 MPa (20-58 psi) output. The metal bowl (C) is a build choice for demanding environments, while the automatic drain (A) removes condensate without manual attention. The 5 um element (W) traps finer particles for sensitive equipment, and the included gauge shows the set pressure on an MPa/psi scale. The J code means no mounting bracket is supplied, so plan for panel mounting or an existing bracket. A reverse-flow (reflux) valve (K) is fitted as an ordering difference. For lines needing oil downstream, order the matching GAFC200-06 combination instead. Note that the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This model has a 1/8" port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum supply pressure of 1.0 MPa (145 psi) with a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. It includes a 5 um element and an automatic drain.
The 'K' indicates that a reverse-flow (reflux) valve is fitted to the unit. This is an ordering difference from models without the 'K' code. The specific function of this valve is detailed in separate catalogue documentation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.