
The AirTAC GAFR Adjustable Filter Regulator GAFR200C06ASJNT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C06ASJNT is a filter and regulator combined into a single body, saving rail space compared to separate GAF and GAR units. It spins incoming air to separate liquid water and trap solid particles, then delivers a steady outlet pressure via a balanced, self-locking regulator that resists drift from vibration.
This model has a 1/8in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi), and a 40 um filtering element. The metal bowl and automatic drain make it suited for industrial environments where condensate must be expelled without manual intervention. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06ASJNT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp on a small assembly fixture with stable pressure, while the filter removes moisture that could corrode the cylinder.
Provide filtered, regulated air to a laboratory test bench where a compact unit with automatic draining keeps the line clean without daily maintenance.
Supply a workshop air tool or blow gun with consistent pressure, while the metal bowl protects against accidental impacts in a busy maintenance area.
Choose this GAFR200 for small jigs or single actuators needing clean, regulated air at modest flow. The 1/8in port suits low-consumption circuits; the 25 cc metal bowl requires more frequent draining than larger bodies like the GAFR300's 60 cc unit. The automatic drain (A) handles wet lines unattended, while the missing bracket (J) means you must provide your own mounting. No gauge is fitted, so the 1/8in gauge connection is available if you add one later. The 40 um element handles general shop air; upgrade to the 5 um element for finer filtration. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. If you need lubrication downstream, order the matching GAFC200-06 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
It is a filter and regulator in one body with a 1/8in port. Pressure range is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and temperature range is -5 to 70 C. The drain bowl capacity is 25 cc and the unit weighs 290 g. It has a 40 um element and an automatic drain.
The 'N' after the port code means no gauge is supplied, leaving a 1/8in gauge connection for adding one later. The 'J' code means the mounting bracket is omitted, so you must use your own panel mount or existing bracket. This configuration suits installations where a gauge is read elsewhere or where space constraints require a custom mount.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.