
The AirTAC GAFR Adjustable Filter Regulator GAFR200C06LJT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C06LJT is a filter and regulator combined into a single compact body, eliminating the need for separate GAF filter and GAR regulator units. This 1/8in port model weighs just 290 g and uses a metal bowl, with the filter element and pressure adjustment mechanism sharing one housing to reduce potential leak points.
This lower-pressure variant regulates from 0.15 to 0.4 MPa (20-58 psi) and filters to 40 um. The circular gauge with MPa/psi scale is fitted, and both semi-auto and manual drains are included. The diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc condensate bowl, keeping the downstream line clean. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06LJT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single small clamping jig or fixture on an assembly bench with clean, regulated air at a stable lower pressure to avoid over-forcing delicate workpieces.
Supply a small pneumatic hand tool or a single-acting actuator where a 1/8in port matches the tool inlet and the 290 g body mounts directly to a panel or frame.
Provide filtered, low-pressure air to a lab fixture or test setup that requires a gentle, steady 0.15-0.4 MPa supply without the bulk of a larger filter regulator.
Choose this GAFR200C06LJT when your application needs a compact 1/8in port with a lower pressure ceiling of 0.4 MPa. The metal bowl suits environments where a transparent bowl might be a concern, though the same -5 to 70 C temperature range applies to all bowl options. The J code means no mounting bracket is included, so plan for panel mounting or an existing bracket solution. The 40 um element is standard; upgrade to a 5 um W element for finer filtration. This unit ships with both semi-auto and manual drains, and the NPT thread gives an MPa/psi gauge scale. If you need lubrication downstream, order the matching GAFC200-06 combination instead. Note that the 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so this lower-pressure regulator has generous inlet headroom for stable output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR200C06LJT is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.4 MPa (20-58 psi), maximum pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), and temperature range of -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g. The unit filters to 40 um and comes with a metal bowl, no mounting bracket, and a fitted circular gauge with MPa/psi scale.
The L code designates the lower-pressure type, regulating from 0.15 to 0.4 MPa instead of the standard 0.15-0.9 MPa, which is ideal for sensitive applications that must not exceed 0.4 MPa. The J code means the mounting bracket is omitted, so you must use an existing bracket or panel-mount the unit. This model also features a metal bowl and both semi-auto and manual drains.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.