
The AirTAC GAFR Adjustable Filter Regulator GAFR200C06LWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200C06LWT is a compact filter & regulator that combines air filtration and pressure regulation in a single body, saving space on small machines. It handles a 1/8in port and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for finer particle removal.
Its metal bowl and semi-auto+manual drain suit applications where condensate is drained manually. Weighing 290 g, this unit is ideal for tight spaces, and its integrated design reduces potential leak points compared to separate filter and regulator components. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200C06LWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small pneumatic jig or fixture that requires clean, low-pressure air for consistent clamping force without over-stressing delicate parts.
Supply a compact bench-mounted pneumatic tool or air brush where a stable 0.15-0.4 MPa output protects the tool and improves finish quality.
Provide filtered, low-pressure air to a laboratory setup or test rig that needs a clean air supply at a controlled, modest pressure.
Choose this GAFR200 if your line needs fine filtration at low regulated pressures. The 1/8in port and 290 g weight place it at the small end of the GAFR range, below the GAFR300's 500 g and 60 cc bowl. The metal bowl is a build choice, while the 5 um element traps finer particles than the standard 40 um, though it will need more frequent service. The included bracket simplifies mounting, and the fitted gauge with MPa/psi scale shows the set pressure. For lines needing oil downstream, order the matching GAFC200-06 combination instead. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR200C06LWT is a filter & regulator with a 1/8in port, a pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum pressure of 1.0 MPa (145 psi). Its proof pressure is 1.5 MPa (215 psi), and it operates in temperatures from -5 to 70 C. The metal drain bowl holds 25 cc, and the unit weighs 290 g.
The 'L' indicates a lower-pressure regulator type, with a maximum regulated output of 0.4 MPa instead of the standard 0.9 MPa. This is suitable for applications that require a limited, stable low pressure. If your machine might ever need more than 0.4 MPa, the standard type would be the correct choice.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.