
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ALJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ALJNWTK is a compact filter & regulator that combines air filtration and pressure regulation in a single nylon-bodied unit. It handles 1/8in ports and delivers a lower pressure range of 0.15-0.4 MPa (20-58 psi), with a 5 um element for fine particle removal.
This model features an automatic drain and a reverse-flow valve, but no gauge or mounting bracket. The 25 cc condensate bowl and 290 g weight make it a lightweight choice for tight spaces, though the absence of a bracket means you'll need an existing panel mount or frame support. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ALJNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small pneumatic press or clamping jig on a workbench where the 1/8in port and 290 g weight keep the footprint minimal. The 5 um element protects fine metering valves from particle wear.
Supply a sensitive pressure sensor or calibration device that needs clean air at a stable low pressure. The 0.15-0.4 MPa range suits low-force applications, and the automatic drain keeps the bowl from flooding.
Run a small pneumatic test rig or prototype where the lower pressure range prevents over-pressuring delicate components. The nylon bowl offers a lightweight build, and the reverse-flow valve is fitted as specified.
Choose this GAFR200 for small jigs or single actuators where space is tight and a 1/8in port matches your tubing. The nylon bowl offers a different build option compared to PC or metal, while the automatic drain suits unattended or wet lines. The 5 um element traps finer particles than the standard 40 um, and the L-type regulator tops out at 0.4 MPa (20-58 psi) - if you might need more pressure later, select the standard S type instead. The J code means no bracket is included, and the N after the port confirms no gauge is fitted; the 1/8in gauge connection is there if you add one later. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. For lubrication downstream, order the matching GAFC200-06 combination. Remember: 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator operates from 0.15-0.4 MPa (20-58 psi) with a maximum supply of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). It works in temperatures from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The port is 1/8in, the element is 5 um, and it uses NPT threads.
The N after the port code means no gauge is supplied, so you cannot read the set pressure without adding one to the 1/8in gauge connection. The J code means the mounting bracket is omitted, so you need an existing panel mount or frame support rather than relying on the included bracket.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.