
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ALNTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ALNTK is a compact filter and regulator combined into a single body, saving space on small machines. It handles 1/8in ports with a lower pressure range of 0.15-0.4 MPa (20-58 psi), using a 40 um element to clean the air. The nylon bowl and automatic drain make it suitable for wet environments where manual draining is inconvenient.
This unit's diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc condensate bowl, while the balanced regulator holds the outlet steady as supply pressure varies. Weighing just 290 g, it suits small jigs or single actuators where a full-size unit would be overkill. There is no lubricator here; if oil is needed downstream, order the matching GAFC200-06 combination instead. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ALNTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or fixture on a benchtop assembly station. The 1/8in port and 290 g weight let it mount directly on the machine frame without straining tubing.
Use on a mobile calibration cart where space is limited. The automatic drain keeps the bowl from flooding during unattended overnight tests, and the lower pressure range suits delicate instruments.
Supply a small conveyor stop gate that runs at 0.3 MPa. The nylon bowl resists cracking from occasional impacts, and the included bracket secures it to the frame.
Choose this GAFR200 when your line is 1/8in and space is tight; the 200 body's 25 cc drain bowl is the smallest in the series, so expect more frequent checks than a GAFR300's 60 cc bowl. The nylon bowl (N) is a build choice, not a performance upgrade, and the automatic drain (A) handles condensate without manual intervention. The L type caps at 0.4 MPa, so verify your actuators never need more; the included bracket simplifies mounting, and the 1/8in gauge connection is ready if you add a gauge later. The K code adds a reverse-flow valve, which is an ordering difference you should confirm with your application. If your line needs lubrication downstream, the matching GAFC200-06 adds that function. For sizing, remember that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a 1/8in port, a working pressure range of 0.15-0.4 MPa (20-58 psi), and a maximum pressure of 1.0 MPa (145 psi) with a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 40 um element, a 25 cc drain bowl, and weighs 290 g. The automatic drain and nylon bowl are fitted, and the gauge connection is 1/8in.
The K code indicates a reverse-flow (reflux) valve is attached to this unit. It is an ordering difference from models without K; the catalogue defers its function to a separate page, so confirm with AirTAC if you need details on its operation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.