
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ALTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ALTK is a filter and pressure regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/8in port with a lower-pressure range of 0.15-0.4 MPa (20-58 psi) and a 40 um filtering element.
Its nylon bowl and automatic drain make it a low-maintenance choice for compact automation. The unit weighs 290 g, and its diversion structure spins incoming air to separate liquid water and solid particles into the 25 cc condensate bowl, keeping the regulated downstream air clean. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ALTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic clamp or small indexing fixture on a benchtop assembly station, where the 1/8in port and 290 g mass fit neatly into tight machine envelopes.
Provide filtered, regulated air at a controlled lower pressure to a small laboratory test rig or prototype setup, with the automatic drain handling condensate without manual attention.
Protect a handheld pneumatic tool on a service cart, using the 40 um element to trap particles and the regulator to keep output within the lower pressure band for delicate operations.
Choose this GAFR200 when your circuit needs a compact 1/8in port and a lower 0.15-0.4 MPa (20-58 psi) regulated band. The nylon bowl offers an alternative build to the standard PC, while the automatic drain suits unattended operation or wet supply lines. The included mounting bracket simplifies panel installation, and the fitted gauge with MPa/psi scale shows set pressure directly. The reverse-flow (reflux) valve is fitted as an ordering difference, and the 40 um element handles general shop air. For lines needing oil downstream, order the matching GAFC200-06 combination instead. A 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
It is a filter & regulator with a 1/8in port, a lower pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g.
The K indicates the reverse-flow (reflux) valve is fitted. It is an ordering difference from models without this valve; the catalogue defers its function to another page, so we recommend confirming the operational details from the official datasheet if needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.