
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ASJNWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ASJNWT is a filter and regulator combined into a single body, eliminating the need for separate components and reducing potential leak points. This compact unit handles a 1/8" port and weighs just 290 g, making it suitable for tight spaces on small machines.
It delivers a standard pressure range of 0.15-0.9 MPa (20-130 psi) and uses a 5 um filter element to capture fine particles. The nylon bowl and automatic drain simplify maintenance in automated setups, while the lack of a gauge means you must add one via the 1/8" connection to monitor output pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJNWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small clamping jig on a benchtop press with clean, regulated air. The 5 um element protects the jig's fine pilot valves from particle wear.
Provide stable pressure to a laboratory test fixture that uses a sensitive pressure switch. The balanced regulator holds the setpoint as the shop supply fluctuates.
Operate one small pneumatic cylinder on a packaging line. The compact 290 g body mounts directly to the machine frame without stressing the tubing.
Choose the GAFR200 body for small jigs or single actuators where space is limited; the 1/8" port matches miniature valves and cylinders. This model has a nylon bowl, an automatic drain for unattended operation, and a 5 um element for finer filtration, but no mounting bracket and no gauge. If you need to read the set pressure, add a gauge to the 1/8" connection, or select a version with the gauge pre-fitted. For lines that need lubrication downstream, order the matching GAFC200-06 combination instead. Note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR200N06ASJNWT is a filter & regulator with a 1/8" port, a pressure range of 0.15-0.9 MPa (20-130 psi), a max pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, has a 25 cc drain bowl, and weighs 290 g. The unit has a 5 um filter element and an automatic drain.
The 'N' in the code after the port indicates no gauge is supplied. This is for installations where a panel-mounted gauge already exists or where the set pressure is verified with a portable tester. The unit has a 1/8" gauge connection if you need to add one later.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.