
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ASJNWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ASJNWTK is a genuine AirTAC filter & regulator that combines air filtration and pressure regulation in one compact body. This 1/8in unit handles 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to capture fine particles before the balanced regulator stabilizes outlet pressure.
Its nylon bowl and automatic drain make it suited for unattended operation, while the reverse-flow valve is fitted as an ordering difference. Weighing just 290 g with a 25 cc condensate bowl, this single-body design replaces separate filter and regulator units, reducing potential leak points and saving rail space. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJNWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR200 is 1/8" if you add one. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a small clamping fixture on an assembly bench where 1/8in tubing delivers filtered air at a stable 0.15-0.9 MPa to a single pneumatic actuator.
Protect a compact bench press or manual test station with 5 um filtration that keeps fine abrasive particles away from sensitive valve internals.
Condition air for a small laboratory setup that needs consistent pressure without the space footprint of separate filter and regulator components.
Choose the GAFR200 body for small jigs or single actuators where 1/8in ports match the circuit. The nylon bowl (N) offers a material alternative to PC or metal, while the automatic drain (A) suits wet lines or remote locations where manual draining is impractical. This model omits the mounting bracket (J), so plan for panel mounting or an existing bracket, and has no gauge (N) - the 1/8in gauge connection is ready if you add one later. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The reverse-flow valve (K) is included as specified. If your line needs lubrication downstream, order the matching GAFC200-06 combination instead of this unit. 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator operates at 0.15-0.9 MPa (20-130 psi) with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof pressure. Temperature range is -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g. The 1/8in port and 5 um element make it suitable for small precision circuits.
The N after the port code means no gauge is supplied, leaving the 1/8in gauge connection available for a separate gauge if you need to read output pressure. The J code omits the mounting bracket, so you must use an existing bracket or panel mount. Both options reduce cost when these features are already present in your setup.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.