
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ASJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ASJTK is a filter and regulator combined into a single body, saving space on small machines. It handles 1/8in ports, works from 0.15 to 0.9 MPa (20-130 psi), and uses a 40 um element to trap particles.
This unit spins incoming air to separate liquid water and solid debris into a 25 cc nylon bowl, while the balanced regulator holds outlet pressure steady. The automatic drain clears condensate without manual attention, and the NPT thread gauge reads in MPa/psi.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic jig or small clamping cylinder on a benchtop assembly station, where the 1/8in port and 290 g body fit tight spaces.
Supply clean, regulated air to a lab test fixture with a 40 um element, protecting sensitive valves from particulates in the line.
Power a small air tool or spray gun in a mobile cart setup, using the automatic drain to handle condensate without manual checks.
Choose this GAFR200 for compact circuits with 1/8in ports, where the 290 g weight suits panel mounting rather than tubing support. The nylon bowl offers a build alternative to PC, and the automatic drain suits wet or unattended lines. This model omits the bracket for existing mounts, keeps the gauge, and includes the reverse-flow valve as an ordering option.
For lines needing oil downstream, order the matching GAFC200-06 combination instead. Max supply 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range, so plan inlet pressure near 1.0 MPa for full output.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), temperature range is -5 to 70 C, drain bowl capacity is 25 cc, and weight is 290 g.
The K code indicates the reverse-flow (reflux) valve is fitted as an ordering difference. The catalogue defers its function to a separate page, so consult the full datasheet for operational details.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.