
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ASJWTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ASJWTK is a genuine AirTAC filter & regulator, combining both functions in a single body. It cleans incoming air through a diversion structure that spins out liquid water and solid particles, then delivers a steady outlet pressure via a balanced, self-locking regulator. This model uses a 1/8in port, a 5 um element, and a nylon bowl, with a working pressure range of 0.15-0.9 MPa (20-130 psi).
This compact unit weighs just 290 g and has a 25 cc condensate bowl. Because the filter and regulator share one body, it replaces a separate GAF filter plus GAR regulator, reducing potential leak points and saving rail space. The automatic drain handles condensate without manual intervention, and the reverse-flow (reflux) valve is fitted as an ordering difference. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASJWTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic jig or fixture on a benchtop assembly station. The 1/8in port and 290 g weight suit compact setups where space is tight.
Supply a small bore cylinder on a light-duty machine. The 5 um element protects precision valves from fine particles that could cause wear.
Use on an engineering test bench for a single actuator or sensor circuit. The automatic drain keeps the 25 cc bowl from overflowing during extended testing.
Choose the GAFR200 for small jigs or single actuators where a 1/8in port and a 290 g body are appropriate. The nylon bowl is a build choice; the common specification of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm compatibility for aggressive surroundings. This model has an automatic drain (A), no mounting bracket (J), a fitted gauge with MPa/psi scale (NPT thread), and a 5 um element (W) for finer filtration. If oil is needed downstream, order the matching GAFC200-06 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
Working pressure is 0.15-0.9 MPa (20-130 psi), max pressure is 1.0 MPa (145 psi), and proof pressure is 1.5 MPa (215 psi). Temperature range is -5 to 70 C. The drain bowl holds 25 cc, and the unit weighs 290 g. It has a 1/8in port and a 5 um filter element.
The K indicates a reverse-flow (reflux) valve is fitted. It is an ordering difference; the catalogue defers its function to a separate page not included in our data. This model also has an automatic drain (A) and no bracket (J).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.