
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06ASWT is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06ASWT is a compact filter & regulator that combines air filtration and pressure regulation in a single body, saving space on small machines. It handles 1/8in ports and delivers a standard 0.15-0.9 MPa (20-130 psi) range with a 5 um element for finer particle removal.
Its nylon bowl and automatic drain make it suited for unattended operation, while the included bracket simplifies mounting. The unit weighs 290 g, and its diversion structure spins air to separate liquid water and solids into the 25 cc drain bowl, keeping downstream components protected. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06ASWT |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Included |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic jig or fixture with clean, regulated air at 1/8in port size, ensuring stable clamping force for light assembly tasks.
Power a small bench-mounted pneumatic tool or air cylinder, with the 5 um element protecting sensitive components from fine particulates.
Supply a compact laboratory or test rig with filtered air, using the automatic drain to handle condensate in low-duty cycles.
Choose the GAFR200 body for small jigs or single actuators with 1/8in ports, where its 290 g mass suits panel mounting. The nylon bowl offers a build option without changing the -5 to 70 C rating, so confirm compatibility for aggressive environments. The automatic drain handles wet lines without manual intervention, and the 5 um element traps finer particles than the standard 40 um, though it may need more frequent service. The included bracket simplifies installation, and the NPT thread provides an MPa/psi gauge scale. If oil is needed downstream, order the matching GAFC200-06 combination instead. Max supply 1.0 MPa leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
This filter & regulator has a pressure range of 0.15-0.9 MPa (20-130 psi), max pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), and operates from -5 to 70 C. It has a 25 cc drain bowl and weighs 290 g.
The automatic drain (A) expels condensate from the 25 cc bowl without manual intervention, ideal for wet or unattended lines. This model also has a nylon bowl and a 5 um element for finer filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.