
The AirTAC GAFR Adjustable Filter Regulator GAFR200N06LJTK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR200N06LJTK is a compact filter & regulator from AirTAC, combining particle filtration and pressure control in a single 1/8in body. It handles air at 0.15-0.4 MPa (20-58 psi) with a 40 um element, and the nylon bowl collects condensate. This unit weighs 290 g and has a drain bowl capacity of 25 cc.
A diversion structure spins the incoming air to separate liquid water and solid debris into the bowl, while the balanced regulator holds the outlet steady as supply pressure varies. The pressed-in self-locking knob resists drift from vibration, making this a stable choice for small jigs or single actuators. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAFR Adjustable Filter Regulator GAFR200N06LJTK |
|---|---|
| Series | GAFR200 filter & regulator |
| Port size | 1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Bracket | Not included (J) |
| Weight | 290 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR200 | GA200 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC200-06 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR200 · 1/8" · curve to 2000 L/min |
|---|---|
| One size up | GAFR300 (curve to 3500 L/min) |
| Add a lubricator | GAFC200-06 (F.R.L. combination) |
Feed a single pneumatic cylinder or a small clamping jig on a benchtop assembly station. The 1/8in port and 290 g mass suit compact fixtures where space is tight.
Regulate air for a small blow gun or a manual press in a maintenance shop. The lower pressure range protects delicate operations from over-pressurization.
Provide filtered, regulated air to a laboratory test setup that requires a stable but modest pressure. The 25 cc bowl is easy to check and drain between runs.
This GAFR200 is the smallest body in the series, with a 1/8in port and a 2000 L/min flow curve plotted at 0.7 MPa inlet. The nylon bowl is a build choice; the common spec of 1.0 MPa max and -5 to 70 C applies to all bowl materials, so confirm compatibility for aggressive surroundings. It ships with both semi-auto and manual drains, and the 40 um element is the standard grade. The L type limits output to 0.4 MPa, so if the machine may ever need more, the S type is the correct part. The J code means no bracket is included, and the K code adds the reverse-flow (reflux) valve as an ordering difference. The fitted gauge reads MPa/psi on the NPT thread. For lines needing oil downstream, the matching GAFC200-06 combination adds a lubricator. 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC200-06 combination; do not expect an oil mist from this unit.
The GAFR200N06LJTK is a filter & regulator with a 1/8in port, working pressure range of 0.15-0.4 MPa (20-58 psi), max pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), temperature range of -5 to 70 C, drain bowl capacity of 25 cc, and weight of 290 g. It uses a 40 um element and has a nylon bowl with semi-auto and manual drains.
The K code indicates the reverse-flow (reflux) valve is fitted. It is an ordering difference from models without K; the catalogue defers its function to a separate page not included in our data, so no operational details are provided here.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.